Replies to This Discussion

Permalink Reply by Mark Ballard on February 5, 2020 at 4:14pm

Thanks will probably need to do that......

Mark

• ▶ Reply

Permalink Reply by Taffy Evans on February 5, 2020 at 1:04pm

Hi, I do as you other guys do, sort through the stack. At the hardware stores its a lot easier, as in the photo I have posted before. In a timber yard its a bit more demanding, as in the photo of a stack of rosewood I picked out of a huge pile over 3 years. In this case I identified what was suitable down the pile, and waited until others had purchased what was on top so there was less for me to move. 

I was looking for quartersawn boards while other buyers did not care. I got it cheaper years before it was stocked in Luthier supply outlets and received a more expensive status.

If I could not get it on a good 1/4 cut [in the 3rd photo] I do as you guys have already mentioned. I recut and reglued, I removed any bows first so as not to have any stress in the piece.

Notice how the angled grain orientated. And in the middle photo the boards and neck blanks are "stickered" so as to have air movement all around.

Taff 

• ▶ Reply

Permalink Reply by Mark Ballard on February 5, 2020 at 4:16pm

Great info.  Thanks!

Mark

• ▶ Reply

Permalink Reply by KOOL DOG HOOCH on February 6, 2020 at 5:03pm

Try Parker's building supply on Court st. Stores like that usually have better grades.

• ▶ Reply

Permalink Reply by Mark Ballard on February 6, 2020 at 7:12pm

LOL, I forgot about that place.  Good idea, thanks!

Mark

• ▶ Reply

Permalink Reply by KOOL DOG HOOCH on February 7, 2020 at 1:18am

Good grief, I live in floriduh and I have to tell you what's in your back yard. Are you really allowed to play with sharp objects? LOL 

• ▶ Reply

Permalink Reply by Mark Ballard on February 7, 2020 at 9:29am

Yup.  And they even let me play with fire.  Great ain’t it!

LOL

• ▶ Reply

Permalink Reply by KOOL DOG HOOCH on February 7, 2020 at 10:53am

LOL:-)

• ▶ Reply

Permalink Reply by Ben Ridgeway on February 7, 2020 at 4:11pm

Hibdon Hardwood has irregular neck blanks at a very reasonable price
A guy can get 2 CBG necks from each blank
The Spanish Cedar is a personal fave

• ▶ Reply

Permalink Reply by Mark Ballard on February 8, 2020 at 11:09pm

Ben,

Thanks.  i’ll Check out Hibdon.  I love working with Spanish Cedar.  Have built some Ukulele necks with it.

• ▶ Reply

Permalink Reply by Ben Ridgeway on February 9, 2020 at 11:03am

You're welcome sir, glad to help

• ▶ Reply

Permalink Reply by Jon on February 9, 2020 at 1:36am

http://www.alamohardwoods.com/

if you can find a real lumber mill near you, you should find lots of good options. I found the one in the link by searching near San Antone. It’s fun to go there and they have lots of choices. Buying hardwoods at home schmepot is severely limited. Good luck!

• ▶ Reply

• ‹ Previous
• 1
• 2
• 3
• Next ›
• Page