Replies to This Discussion

Permalink Reply by Justin Hilts on November 1, 2017 at 6:35am

Ya, I like it. saw a picture somewhere of someone who did that

• ▶ Reply

Permalink Reply by Michael Fred Johnson on November 5, 2017 at 1:49am

Like the idea of the sound holes/cut outs to allow bowing.Just been repairing an old violin now I know what to do with the old nut/fingerboard etc.Great build.  

• ▶ Reply

Permalink Reply by Justin Hilts on November 6, 2017 at 5:04am

Thank you, I want to find an old beat up violin to fix up, I think that would be fun. Then I also want to build a more traditional violin with an archtop but just not with the "classic shape" lol.

• ▶ Reply

Permalink Reply by Justin Hilts on November 6, 2017 at 5:05am

I had to make a fix

Update!

So I have noticed that over the last 2 weeks of playing that the top of the fiddle was starting to bow in and the back was bowing out. There was just not enough support with the 3mm top and bottom. So I had to add some bracing. on the bottom plate, I added a peace on 1/8th mahogany that spans all the way across, that way it would take out the bow that the wood was starting to "remember". On the top plate, I added a small piece of 1/8 mahogany to prevent the sound post from ever punching through and to help support the bridge. So far so good, it seems to have done the trick. Guess that's why flat top acoustic guitars have all that bracing since there is not a curve top to spread out the weight.

• ▶ Reply

• ‹ Previous
• 1
• 2
• Next ›
• Page