I am enjoying building CBG type instruments and have completed 3. One area I am struggling with is the nut. I have been cutting nuts from Corian and fitting to necks that I have crafted using hand tools. Well the nuts just don't set very well. I suppose I could hold it in position and glue with CA glue but if I cut the string slots too deep I might find it difficult to remove the nut. I have attempted to provide a 90 degree ledge in the neck and cut the nut at 90 degrees also. Any suggestions?
Thanks in advance,
Grandpa G
Tags:
as others have said those string slots are way too deep. get your nut slot or shelf flat and perpendicular to the neck first then user that to give you the size of nut you need. then after you have that in place mark off the fret slots this way if you have to remove more material to make it square you wont get the intonation out of wack...
I'll agree with what you are trying to say, if not necessarily the way it was said.
the nut slots are cut however deep they need to be cut to get the correct action height at the first fret. But since the string only touches the sides and bottom of the slot, the excess bit of the nut sticking above the string gets removed, mostly for looks and partly to clearly see the string is sitting correctly in the slot, and a bit for the string not binding when you set it down in the slot.
Many thanks to all for your suggestions. I have decided to use the CA glue option and am happy with the result. I might try the "faux trussrod cover" on a future build.
Also, my apology for downloading the wrong image. The image I downloaded was a previous build before I learned the importance of slot depth. I am attaching a photo of the current instrument for your viewing.
Again, many thanks, awesome info!!!
Grandpa G
not sure why anybody would make jokes, the results speak for themselves.
I'm with Wayfinder on this one. Zero fret all the way, string space holder behind the zero fret.
You can get really creative with the space holder
I don't see the point in doing a zero fret myself. Even if you use a zero fret, you still have to make string guides to keep the strings from wandering/moving around. I think a nut looks better than having a zero fret and several screws to keep the strings in place.
A nut has built in string guides - slots that also make the string height right.
The reasons why people have problems making a proper nut are: 1. They haven't researched how to make a proper nut. 2. Don't have any proper tools or skills with said tools to make a proper nut.
Any job/project worth doing, is worth doing right the first time. Do your research. Don't be afraid to ask questions before starting and have the patience to get the knowledge before jumping in.
A secret to all is:
If you want a quick and simple solution to this topic, use a bolt/screw for your nut laid across the fretboard. It has built in guides and has a fulcrum point at the top so you don't have to cut angled slots. The threads come in different pitches to allow for bigger strings or you can simply file it to fit.
I'm on board with the zero fret idea as Wayfinder stated. There are many advantages, but here are a few:
1. No String Buzz: Nuts are a common cause of string buzz, even on commercially built guitars. Sure, a knowledgeable builder can carefully file and shape the string grooves in the nut to fix this, but the zero fret removed the nut from the string performance equation.
2. Precise Action Height: A zero fret set the action very accurately. It is possible to file each nut groove to achieve correct action height, but, again, it is a precision hand operation. Not needed with a zero fred.
3. Depending on how you approach your zero fret, you can end up with an easily adjustable action height. This is really nice when you want to fret the guitar and need low action, then want to play slide and need some extra action height. Using music-wire for a zero fret means you can easily change wire diameter and thus action height (see previously posted photo).
I avoided the zero fret for several years, then gave it a try. After that, there was no question that it was the best way to go for me.
There is no question that with practice, patience and some spare nuts to work on, you can achieve a buzz free nut with good action height. That being said, why not adopt an improved approach to the nut function that works every time and does not require a surgeons hand. It seems that commercial guitar guys like StewMac feel the same since they recently added a zero fret kit for high end Fenders.
Started by J. D. Woods in Performances, How to Play, Lessons, Concerts. Last reply by Southern Ray yesterday. 8 Replies 1 Like
Started by Southern Ray in Other stuff - off topic, fun stuff, whatever. Last reply by Southern Ray yesterday. 6 Replies 0 Likes
Started by J. D. Woods in Performances, How to Play, Lessons, Concerts. Last reply by BrianQ. on Thursday. 4 Replies 0 Likes
Started by Rich Butters in Building Secrets, Tips, Advice, Discussion. Last reply by Crazed Fandango on Tuesday. 4 Replies 0 Likes
Started by Nomad Jack in Performances, How to Play, Lessons, Concerts. Last reply by J. D. Woods Apr 17. 7 Replies 2 Likes
Started by Moritz Voegeli in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 14. 6 Replies 2 Likes
Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Apr 10. 14 Replies 3 Likes
Started by Tom T in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 9. 9 Replies 0 Likes
Started by Southern Ray in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 4. 7 Replies 1 Like
Started by Timothy Hunter in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Mar 27. 1 Reply 2 Likes
Started by Taffy Evans in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Mar 10. 1 Reply 3 Likes
Started by Cigar Box Nation in Feature Articles. Last reply by BrianQ. Mar 9. 4 Replies 3 Likes
Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies 1 Like
Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies 0 Likes
Started by Ken I in Building Secrets, Tips, Advice, Discussion. Last reply by Brian partington Mar 8. 8 Replies 0 Likes
Started by Southern Ray in Cool gear discussion - that's not cigar box related. Last reply by Southern Ray Mar 6. 5 Replies 0 Likes
Started by Taffy Evans in Other stuff - off topic, fun stuff, whatever. Last reply by Taffy Evans Mar 5. 4 Replies 2 Likes
Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Carl Floyd Mar 1. 15 Replies 0 Likes
Started by Joe in Performances, How to Play, Lessons, Concerts. Last reply by Carl Floyd Feb 29. 13 Replies 0 Likes
Started by Chance in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Feb 22. 12 Replies 1 Like
Posted by Vlad on March 31, 2024 at 11:48pm 0 Comments 1 Like
Posted by Vlad on March 6, 2024 at 2:32am 5 Comments 2 Likes
Posted by billy jones bluez on February 28, 2024 at 2:09pm 0 Comments 0 Likes
Posted by billy jones bluez on February 17, 2024 at 11:00pm 0 Comments 0 Likes
Posted by Vlad on February 11, 2024 at 1:06am 1 Comment 1 Like
May 11, 2024 from 11am to 8pm – Speakeasy Grill
0 Comments 0 LikesMay 30, 2024 from 6:30pm to 10pm – The Casual Pint of Huntsville
0 Comments 0 Likes© 2024 Created by Ben "C. B. Gitty" Baker. Powered by
Cigar Box Nation is presented by C. B. Gitty Crafter Supply, your one-stop-shop for Cigar Box Guitar parts and accessories!