Tags:
2 well worthwhile tools, an extensive set of drill bits (cheap HF is fine) and a drill bit guage (plastic card with a plethora of holes, each one labeled what size drill bit it corresponds to)
I use the guage for EVERY hole I drill to pick the right bit. Its quite lovely to drill 1 hole and the tuner fits perfectly without rasping/reaming it bigger and -oops- too big now its loose...to set the anchor screws for the tuners in with little effort but they feel rock solid, and so on.
Hey man, I'm new to this hobby but it looks to me like the neck is plenty strong. I'm working on a build right now that has a neck with two deep notches needed for some internals the guy wants installed. I've had to install additional support in the box just to support the neck witch is only 3/8" thick. If I can I'll send pictures.
Just a side note but I make my 3 stringers 35mm wide x 30 mm depth and D shape the back of the neck from a straight through 45mm x 40mm blank.
My strings have 12mm spacing and run parallel up my fretboard.
I chose this size of neck from roughly taking the size of my fingers making an OK hand shape gesture and guessing the diameter of the hole made from my index finger and thumb touching each other.
I drop my string spacing to 10mm or 9mm for 4 stingers and have 4 mm side spacing (33/35mm) bringing the depth down slightly to 28mm.
If I wanted a +23 inch scale length 4/5/6/7/? Stringed instrument I would seriously consider a truss rod or bracing rod.
hey all thought I would update, still not finished other things like work and family been getting in the way of the build. however I have finally soldered the volume pot (or at least what I thought was a volume pot) to input jack and pickup. Tested it by plugging it into an amp and holding it over another guitar and we have volume :D The Soldering was a bitch.
Then fixed the pickup to the neck ran into problem ended up supergluing to the wood, after fighting with the screws for a day or two.
The tunning peg fitment went well, the screws I bought fitted, what a relief. Fitted one string to double check string height etc. All good. Plugged it in, still smug with myself for having volume, went to turn it down......Nooooo its a bloody Tone Pot.
So I have left:
Joe
A cheap "helping hands" makes it a lot easier, a little stand with flex arm alligator clips to hold the stuff in place for you.
and just as wayfinder said, heat the solder, not the component, let the hot solder do the work, pre-apply some solder to the bits you intend to join (called tinning) before you join them and they go together much easier.
Started by J. D. Woods in Performances, How to Play, Lessons, Concerts. Last reply by Southern Ray 15 hours ago. 8 Replies 1 Like
Started by Southern Ray in Other stuff - off topic, fun stuff, whatever. Last reply by Southern Ray 15 hours ago. 6 Replies 0 Likes
Started by J. D. Woods in Performances, How to Play, Lessons, Concerts. Last reply by BrianQ. yesterday. 4 Replies 0 Likes
Started by Rich Butters in Building Secrets, Tips, Advice, Discussion. Last reply by Crazed Fandango on Tuesday. 4 Replies 0 Likes
Started by Nomad Jack in Performances, How to Play, Lessons, Concerts. Last reply by J. D. Woods Apr 17. 7 Replies 2 Likes
Started by Moritz Voegeli in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 14. 6 Replies 2 Likes
Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Apr 10. 14 Replies 3 Likes
Started by Tom T in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 9. 9 Replies 0 Likes
Started by Southern Ray in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 4. 7 Replies 1 Like
Started by Timothy Hunter in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Mar 27. 1 Reply 2 Likes
Started by Taffy Evans in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Mar 10. 1 Reply 3 Likes
Started by Cigar Box Nation in Feature Articles. Last reply by BrianQ. Mar 9. 4 Replies 3 Likes
Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies 1 Like
Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies 0 Likes
Started by Ken I in Building Secrets, Tips, Advice, Discussion. Last reply by Brian partington Mar 8. 8 Replies 0 Likes
Started by Southern Ray in Cool gear discussion - that's not cigar box related. Last reply by Southern Ray Mar 6. 5 Replies 0 Likes
Started by Taffy Evans in Other stuff - off topic, fun stuff, whatever. Last reply by Taffy Evans Mar 5. 4 Replies 2 Likes
Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Carl Floyd Mar 1. 15 Replies 0 Likes
Started by Joe in Performances, How to Play, Lessons, Concerts. Last reply by Carl Floyd Feb 29. 13 Replies 0 Likes
Started by Chance in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Feb 22. 12 Replies 1 Like
Posted by Vlad on March 31, 2024 at 11:48pm 0 Comments 1 Like
Posted by Vlad on March 6, 2024 at 2:32am 5 Comments 2 Likes
Posted by billy jones bluez on February 28, 2024 at 2:09pm 0 Comments 0 Likes
Posted by billy jones bluez on February 17, 2024 at 11:00pm 0 Comments 0 Likes
Posted by Vlad on February 11, 2024 at 1:06am 1 Comment 1 Like
May 11, 2024 from 11am to 8pm – Speakeasy Grill
0 Comments 0 LikesMay 30, 2024 from 6:30pm to 10pm – The Casual Pint of Huntsville
0 Comments 0 Likes
© 2024 Created by Ben "C. B. Gitty" Baker.
Powered by
Cigar Box Nation is presented by C. B. Gitty Crafter Supply, your one-stop-shop for Cigar Box Guitar parts and accessories!