I'm on eBay after several conversations with folk from CBN and looking to start venturing into the world of magnetic pickups and away from piezo. I've seen some sets of three Strat style pickups with labeling for the neck, middle and near the bridge. Can I split these up and use one pickup from the set of three for three separate builds? If I could, would I need to keep them in the relative positions? So on one build I could have one near the neck, on another build have the next near the middle and so on or can I split them up and have them anywhere? Why do Strats have three pickups? Help appreciated before I end up buying the wrong thing.

Views: 488

Replies to This Discussion

I should mention that the reason I ask is I'm a cheapskate and trying to get the most bang for my buck. Pickups are expensive! luls

Everything I needed to know and a few extra morsels for the Bank of Grey Matter to be withdrawn at a later date. I've said it before and I'll say it again, you're a wonderful sausage you are. Thanks again, Wayfinder. Always available to freely offer your expertise, someone should give you a job around here! Thanks again :)

Awesome. Think I'll stick to the pickup for now rather than push my worn out brain any more. As another related question, do I need to add a volume and tone pot or just slap a jack on there? Also, I assume I need to ground this pickup? I do that by adding a wire from the pickup to a metal point away from the strings? I saw a video by ChickenBoneJohn on how to ground so I could try and follow that as best as I can if I get confusticated I guess.

Thanks again. My concern is getting the wires wrong as in not knowing which wire is which coming out of the pickup. When you say the hot wire, is it physically hot and that's how you can tell it's the right one? Are they usually a specific colour? Will it say on the pick up which is positive and negative?

In my book it's not really rocket science, they should work fine.  If you want to find out how they sound, build a test CBG and swap them out to see which sounds best.  As far as I know, they will work in any position along the neck.  Generally, closer to the bridge will give a brighter sound and farther up the neck will give a warmer tone.  The three may have different windings which may effect the tone, but they should all work regardless of location.

Thanks Thomas. I was speaking to the anonymous pick on chat the other day (I think it was him) and was told that near the neck is good for blues so I'm looking at that for a location. I appreciate you taking the time to give advice. I'll be able to check the difference between the piezo and the magnetic once I try these so should be able to get a judge from there. Exciting times. I always love learning new things. It adds spice to this life. :)

That's my preferred location as well.  When I want more of a twang I'll build another cookie tin or hub cap resonator.

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Discussion Forum

Cutting deep boxes in half

Started by Justin Stanchfield. Last reply by Taffy Evans Mar 20. 9 Replies

Attention 1st time builders!

Started by BrianQ.. Last reply by MadGomer Feb 27. 2 Replies

Brickhouse CBG Wiring

Started by Ian Boyd. Last reply by Ian Boyd Dec 11, 2023. 1 Reply

Fretless fret markers

Started by Michael Myers. Last reply by Michael Myers Apr 20, 2023. 8 Replies

canjo building and tuning

Started by Brenda. Last reply by MadGomer Dec 3, 2022. 5 Replies

Minimum tools needed

Started by Wichita Sam. Last reply by Taffy Evans Nov 14, 2022. 21 Replies

High G problem

Started by Michael Myers. Last reply by Taffy Evans Nov 3, 2022. 4 Replies

Doubling the high string

Started by Robert Killen. Last reply by Paul Craig Oct 14, 2022. 23 Replies

Aluminum License Plate

Started by Larry Sobol. Last reply by Larry Sobol Oct 1, 2022. 6 Replies

C. B. Gifty three string fretless kits.

Started by jon neet. Last reply by Taffy Evans Aug 16, 2022. 6 Replies

Frettin' and stainin'

Started by Doug Laffin. Last reply by Order99 Aug 11, 2022. 4 Replies

Bolt on neck to a set neck body?

Started by Paul Craig. Last reply by Paul Craig Jul 17, 2022. 14 Replies

Locations

Started by Roy Smith. Last reply by the anonymous pick May 15, 2022. 2 Replies

Help please re Bento Box Uke "nut"

Started by Al Lobe. Last reply by BrianQ. May 10, 2022. 18 Replies

Clarification on pick ups

Started by Michael Myers. Last reply by Taffy Evans May 6, 2022. 5 Replies

Licence plate cbg

Started by Michael Myers. Last reply by Michael Myers May 2, 2022. 5 Replies

Builder's Tips

Started by Wichita Sam. Last reply by MadGomer Feb 23, 2022. 2 Replies

Getting there but needing advice/help please.

Started by Lionhound. Last reply by MadGomer Feb 18, 2022. 8 Replies

Tres Cubano Build

Started by Paul Craig. Last reply by Paul Craig Dec 9, 2021. 18 Replies

CB Gitty Country Roads Banjo kit

Started by Ken Hope. Last reply by Christopher G Daniels Nov 29, 2021. 4 Replies

Latest Activity

AGP # commented on AGP #'s photo
Thumbnail

AGP 8 Stand Carousels

""Thanx A.D." I tried slowing down the number of builds, but I enjoy it too much! :-)"
1 hour ago
Rob (Uker) Porras posted a photo

Soresto ukulele

My wife actually asked me to build this. Every time the dog gets a new collar she tries to find a…
2 hours ago
3 String Blues posted a video

Delta Blues Freestyle Slide - MXL 990 Microphone Recording

Recorded with a MXL 990 Microphone that I bought used off ebay for 40 bucks. Music - from the webpage https://www.reddogguitars.com There is CBGs for sale...
2 hours ago
BrianQ. left a comment for Clydr
5 hours ago
BrianQ. left a comment for James C Bailey
5 hours ago
BrianQ. left a comment for Airam
5 hours ago
T-Gripped liked Dogleg Steve's video
5 hours ago
T-Gripped liked Gary O'slide's video
5 hours ago
Uncle John commented on Uncle John's photo
Thumbnail

Chugger Review 2nd from left

"Thanks. Ron.  I agree on the Padron boxes.  I think they are close to the best for looks…"
6 hours ago
Bassdude updated their profile
8 hours ago
RON NORTHCUTT commented on Uncle John's photo
Thumbnail

Chugger Review 2nd from left

"Nice looking collection, I just finished 2 with the padron boxes, they are among my faves. I have…"
8 hours ago
RON NORTHCUTT commented on Rich's photo
Thumbnail

Retro Tin tail piece view

"That is a super nice build. Everything about it looks great."
8 hours ago

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->