Replies to This Discussion

Permalink Reply by Shawn on December 19, 2014 at 1:21am

Here's a side by side photo of the difference. Yah I could do that or I could re drill the saddle intonation screw holes.

Attachments:

• image.jpg, 220 KB

• ▶ Reply

Permalink Reply by Shawn on December 19, 2014 at 1:31am

Here is another shoot of the difference

Attachments:

• image.jpg, 205 KB

• ▶ Reply

Permalink Reply by Cause the Blue rat on December 19, 2014 at 12:16pm

If you re drilled the intonation saddle holes you could do it at an angle from the old. There is no groves on the base plate for the hight screws.

My Squire tail piece is that narrow as well. That is a major difference there.

• ▶ Reply

Permalink Reply by Shawn on December 19, 2014 at 12:54pm

Yah I should have waited to install the neck till I had this bridge. Lesson learned not to problem solving.

• ▶ Reply

Permalink Reply by Cause the Blue rat on December 20, 2014 at 3:30pm

It's bummer that the bridge is to tall for you build Shawn. Really hope your able to find a solution soon. I've seen your build pics. Sweet guitar! 

All in all this is good info for those who want to use these bridges. Best to get then first. Then plan your build around them if needed. 

• ▶ Reply

Permalink Reply by Shawn on December 22, 2014 at 1:37am

Thanks rat I will find a solution it's the best part of building and playing these critters.

• ▶ Reply

Permalink Reply by Cause the Blue rat on December 26, 2014 at 11:58am

Just wanted to add this. I needed a new bridge for a Fender bass I got at an auction. So I got a real Fender bridge for it. What a piece of, well, bad stuff. The three string bridge from CB Gitty is heavier than this bass bridge. I've actually thought about trying to bend this Fender bridge by bear hand. Honestly think I could. Then thought better of it. So what I did was replace the rusted saddle with one from this cheap thing. Perhaps use the Genuine Fender bridge on a three string bass build latter on.

So for those who want to know. Yes, these three and four string bridges are a good quality product. Apparently a lot better than the Genuine Fender bass bridge I just got.

• ▶ Reply

• ‹ Previous
• 1
• 2
• Next ›
• Page