Well, I am just wondering how people repair the more common mistakes/ For example, if your cutting your box to insert a guitar neck and you cut the hole too deep or too wide. How do you normall correct such? Does anyone ever use a beading around the wooden neck at the hole insert to make the enlargement there less noticible? Do errors as this make the box a toss away or is there a good common fix to such?

 

In a neck through, one actually has two chances to muck up the holes for the interted neck; front and back. It is always easier to work with a hole that is cut out smaller than to cut it larger and then try to repair. Still, mistakes do happen.

 

Any other tips on common mistakes?

 

Thanks,

Huey

Views: 1055

Reply to This

Replies to This Discussion

If that's all you screwed up, you're below average on the fail-scale!  :-)

We're all visual learners? >:-E

In the summer I hide my mistakes under my work bench, but in the winter they go directly into the potbelly stove.

I use those boxes for other purposes, they stick around to remind me of what NOT to do...

My favorite box is any Black, rounded Rocky Patel.  I had two but didn't pay attention to the fact that they're different sizes, so I cut the neck slot off-center on one... :-(   

It holds picks and slides now...

A recent build kept buzzing, even though I glued EVERYTHING down... I ended up cutting the glue joints out, and rebuilding it only to find it still buzzed... I was SOOOO close to cutting the neck off and giving up, until I realized the wires from the piezo resting on the lid...  

A drop of hot glue later, and no buzz..... I won't make THAT mistake again... I'll invent all new ones for next time.

John

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Forum

crossover guitar.

Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Apr 10. 14 Replies

Tune up songs

Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies

Duel output jacks

Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies

Latest Activity

Uncle John posted a photo

Chugger Review 2nd from left

Got my Chugger done a while back. It is second from the left in the photo.It uses a 3D printer fret…
1 hour ago
Doug Thorsvik commented on Doug Thorsvik's video
Thumbnail

Shout with Joy to God: 2-String Chugger License Plate Cigar Box Guitar

"Thanks Uncle John! And, yes, I did put the psalm to music using my 6-string years ago (back in my…"
1 hour ago
Bobthrubass posted a status
"Sorry I haven"t been on here awhile. PLEASE let me Reset my PASSWORD!!!!!"
2 hours ago
Uncle John commented on Doug Thorsvik's video
Thumbnail

Shout with Joy to God: 2-String Chugger License Plate Cigar Box Guitar

"Very good.  Original song- did you put the psalm to music,  Doug?"
3 hours ago
Uncle John commented on Poorness Studios's video
3 hours ago
Uncle John commented on Dogleg Steve's video
Thumbnail

Fiddly Rag from the book Cigar Box Picking by Dogleg Steve

"Another very good one.  Thanks, Steve."
3 hours ago
Uncle John commented on Dogleg Steve's video
3 hours ago
Uncle John commented on Dogleg Steve's video
Thumbnail

My entry for C B Gitty's 4th International Cigar Box video playoffs 2023 Dogleg Steve St Martins Rag

"Good to see and hear you, Steve!  Sounding very fine.   A bright and happy song.…"
3 hours ago
Uncle John commented on Gary O'slide's video
3 hours ago
AGP # liked Gary O'slide's video
16 hours ago
AGP # liked Dogleg Steve's video
18 hours ago
AGP # liked Dogleg Steve's video
18 hours ago

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->