Wow, took the words right out of my mouth (except resophonic, had to look that one up). But I too have a Bass laying around that I want to swap out the body for a cigar box (or two). I tried asking around and researching, but not found any sound advice (just seen some Cigar Box Basses like what I want).
Hi Colin,
I just finished a bass with a tin can body recently. I reused an old Italian EKO Cadet bass neck that I found online. Its a very thin neck so fitting it was pretty much a simple matter of accuracy for the position and alignment. It had some cracks around the original fixing holes so I drilled new holes and added a new neck plate to cover over the old holes. Surprisingly it stays in tune well and is stable to play. I did take the precaution of using a lighter gauge string set ( discard the fattest string use the rest and add a low E from a heavy gauge guitar set) as I was concerned about the neck distorting. Its connected to a through support which is bolted at the back of the tin with cross bracing for the top bottom and sides of the tin. I reused a spare hardtail guitar bridge as I had it to hand (PRS type). Hardest job was getting that positioned and aligned. You can see in the photo that the tailpiece is slightly misaligned so the strings are at a slight angle. Does not seem to have any effect on the tuning though thankfully. I just bought a locally made artisan bass here in Peru to try for my next bass project.
Good Luck.
Jim
jim,
I was thinking on a through the box support. however, my box is around 2 feet long. I was worried about bowing. I was also testing ideas on installing a good thick block near the top of the box and reshaping that area. Good looking build there btw.
brian,
maybe we can both get good ideas then.
Cheers Colin,
I think the bracing is probably the most important aspect. I would not like to rely on the body to transfer the forces. It might also help with sustain by having the through support. - basically a long plank for the bass. There was not really another option for the tin can as its so thin there's nothing to attach anything to.I forgot to mention that I put a wooden plate inside the back of the body cut to size which is covered in fabric. I thought this would help deaden the vibrations of back of the tin. Seems to work.
J
besides the hard attach point for the neck, I would suggest that your use 1/4" hardwood to brace the box sides all the way around. I do this on my bolton neck CBGs and have had no problem.
good to know. thanks.
I've seen people bolt a 2x4 to the end of the neck, then use that as the long brace through the box. I think there's even some interesting instructions on this site on how to make a bass out of a 2x4.
Yeah, here it is: http://storage.ning.com/topology/rest/1.0/file/get/306270002?profil...
okay. I have an idea, I will post info later.
so I am thinking on simply cutting the solid body in half. I can bolt the body to a solid brace then. considering I do not need the box lid for a soundboard it should not be an issue. I will need to figure it out by sight once I get home.
Started by Phil Farabough. Last reply by Phil Farabough Nov 10, 2018. 10 Replies 0 Likes
Started by Patrick. Last reply by BrianQ. Nov 8, 2018. 6 Replies 0 Likes
Started by Daniel Walter. Last reply by Ken Hutchinson Oct 14, 2017. 16 Replies 0 Likes
Started by Mark Wood. Last reply by Mark Wood Mar 27, 2017. 2 Replies 3 Likes
Started by Bryan Putnam. Last reply by Richard Haas Dec 2, 2016. 15 Replies 4 Likes
Started by Henry S. Last reply by TN Twang Nov 30, 2016. 11 Replies 0 Likes
Started by Euraquilo. Last reply by Fomhorach Nov 1, 2016. 6 Replies 0 Likes
Started by Euraquilo. Last reply by Euraquilo Oct 31, 2016. 18 Replies 0 Likes
Started by Will T. Last reply by Murdoc_420 Jul 16, 2016. 3 Replies 0 Likes
Started by PKB. Last reply by Euraquilo Jun 21, 2016. 17 Replies 0 Likes
Started by jeffrey ross. Last reply by jeffrey ross Mar 25, 2016. 13 Replies 0 Likes
Started by PhilUSAFRet. Last reply by Murdoc_420 Mar 25, 2016. 8 Replies 0 Likes
Started by Poppy. Last reply by Murdoc_420 Feb 29, 2016. 7 Replies 0 Likes
Started by Lane Martin. Last reply by Where's Uranus? Jan 7, 2016. 6 Replies 1 Like
Started by Mike. Last reply by Mike Jan 6, 2016. 8 Replies 0 Likes
Started by Bobby Fields. Last reply by Bobby Fields Dec 11, 2015. 3 Replies 0 Likes
Started by Jared. Last reply by Hilo Greg Aug 17, 2015. 14 Replies 0 Likes
Started by Piht Bull (Delta Dawg Guitars). Last reply by Scott aka Farmer Ted Apr 23, 2015. 23 Replies 0 Likes
Started by john mackay. Last reply by john mackay Feb 4, 2015. 4 Replies 0 Likes
Posted by Vlad on March 31, 2024 at 11:48pm 0 Comments 1 Like
Posted by Vlad on March 6, 2024 at 2:32am 5 Comments 2 Likes
Posted by billy jones bluez on February 28, 2024 at 2:09pm 0 Comments 0 Likes
Posted by billy jones bluez on February 17, 2024 at 11:00pm 0 Comments 0 Likes
Posted by Vlad on February 11, 2024 at 1:06am 1 Comment 1 Like
May 11, 2024 from 11am to 8pm – Speakeasy Grill
0 Comments 0 LikesMay 30, 2024 from 6:30pm to 10pm – The Casual Pint of Huntsville
0 Comments 0 Likes© 2024 Created by Ben "C. B. Gitty" Baker. Powered by
Cigar Box Nation is presented by C. B. Gitty Crafter Supply, your one-stop-shop for Cigar Box Guitar parts and accessories!