How to make a guitar pick-up from a mains adaptor. Inspired by Isaac on CigarBoxNation.com http://www.cigarboxnation.com/video/diy-magentic-pickup-from-a or on YouTube at http://www.youtube.com/user/isaaculla...

This such a great idea and a perfect example of re-cycling

I will be refining the details and demonstrate a final version as soon as I can. Probably worth wiring up both of the two coils to see if it gives a fuller sound

Views: 300

Comment

You need to be a member of Cigar Box Nation to add comments!

Join Cigar Box Nation

Comment by MrRandomWritings (Backwater Bri) on September 6, 2010 at 11:13am
Think I have solved it - wired up the 2 coils in series and ran a ground wire from the magnet to the jack - it increased the volume and reduced the buzz. Have just wired up 2 coils with separate volume controls and a 3 way switch - tests working well - will see how good it is when I assemble the guitar
Comment by LittleBigOne on August 29, 2010 at 6:07am
Hi Brian, maybe it could be best if we could have a chat as that will be faster :-) Anyway just follow what works because we are using weak materials so that may change from one to another and whatever worked for me may not work for you :-S So far I don't have what's needed to record videos sorry but I will try to experiment and maybe we could have a video chat so we can check things ; By the way that would be great if you make a blog post or a video to explain how you are doing to record and edit your videos, what software you use etc...
Comment by MrRandomWritings (Backwater Bri) on August 29, 2010 at 1:41am
Hello again LBO - I did attach some magnets but as soon as I connected the 2 leads together it was dead whatever connection I used. I will try again as I am determined to get it to work! Have you tried it? Could you do a demo video in case I am being stupid and misunderstanding your instructions?
Comment by LittleBigOne on August 27, 2010 at 11:49pm
If you connected right, the only reason that could fail is the magnet is too weak, or in your case the
metal did not magnetize enough. Test it with some screws, see how many screws can get attached one to
another and to the magnet in the end (like a chain) and compare with a real one to get an idea.
It's possible the "thing" lost magnetization un time, try to send some weak electric courant (from a battery for example) inside for one hour then test your magnet ; simpler is to re-magnetize your thing in my opinion.
I noticed the same problem with weak loud speakers, they have a weak magnet, the largest speakers have a stronger magnet, that's why I suggested to you to use a loud speaker (anyway that is a deep idea because the loudspeaker can replace a piezo+pickup) :-)
Comment by MrRandomWritings (Backwater Bri) on August 27, 2010 at 10:32pm
LittleBigOne - I am so impatient! Tried it and I am afraid it was fail!
Comment by MrRandomWritings (Backwater Bri) on August 27, 2010 at 10:22pm
@ LittleBigOne - Hi - I just noticed your wiring comment about connecting the magnet and both coil leads to + and -. Sorry I missed it before - I will give that a test run later today and let you know. I confess I haven't studied a real coil pickup so maybe I shoudl have!
Comment by Little Soul Eric on August 27, 2010 at 9:59pm
That was great eeeh the great car boot ...........
Comment by Jerryrig240 on August 6, 2010 at 6:07am
Well, I have a new license plate guitar in the works in the garage.....it has a transformer as a pickup and a peizo tied into it for good measure. I am not sure yet if the transducer is sounding better than the transformer or what, but I hooked up one string on it last night just to test it out. It is a rat rod style build, so I need to do some sanding and some more sodering and it will be done by tonight I think. I am thinking about add a couple of switches to switching things on and off for testing.
Comment by Jerryrig240 on August 5, 2010 at 4:03am
I made a video last night, but youtube rejected it for being to long. It just showed some testing I was donig on some of the coils. I all ready have a rat rod license plate guitar in the works.....I cut some of the peices out for the body and I am going to use a transformer for the pickup, and I think I am going to stuff a peizo transducer in their for more of a lo-fi sound, that is what I have in my other rig. I just hope I can get over the smell of the spray paint that I painted my body with.
Comment by LittleBigOne on August 4, 2010 at 7:10pm
LOL :D that would be funny for a video, to see somone moving inside the house and in everything electrified he can see, he sees a coil and a magnet for a soon-to be pickup, then he goes out searching for fresh air, feeling something weird is happenning, and from garage to the street again all he sees transform into a pickup, frightenned, he starts running crazy in the town and all he sees are coil and magnets for pickup LOL :D In the end a background voice calling his name wake up from a dream, someone is ringing at the door, the voice is shouting at him to go open the door, he wakes up on a seat in front of the dining table, full of electrical stuff (like yours) and while he goes up difficultly going to open the door, the movie zooms on a coil-magnet in the middle of the table suggesting something weird is going to happen... LOL :D

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Forum

Nut

Started by Bill Andy in Performances, How to Play, Lessons, Concerts. Last reply by Taffy Evans yesterday. 6 Replies

crossover guitar.

Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Apr 10. 14 Replies

Tune up songs

Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies

Duel output jacks

Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies

Latest Activity

Profile IconTimothy Peter Cooper and Sam Tringali joined Cigar Box Nation
1 hour ago
BrianQ. left a comment for Sam Tringali
3 hours ago
BrianQ. liked Doug Thorsvik's video
3 hours ago
Southern Ray replied to Bill Andy's discussion Copper Hardware
"Taffy makes good points. I have no experience either with the paint, but I have a bunch of 50+ year…"
4 hours ago
Doug Thorsvik posted a video

California Dreaming: 3D Printed Cigar Box Guitar

Cigar Box Guitar Slingers - Spokane, 201st Zoom Mtg 05/06/24. Only 1-finger chords, free songbooks here: https://www.cbgslinger.com/download CBG Songbook.pdf...
7 hours ago
Uncle John commented on Ghostbuttons's photo
Thumbnail

2 night project

"Very nice.  A clean and handsome fretless."
7 hours ago
Uncle John commented on Wanhavihtahousu's photo
Thumbnail

IMG_5132

"Those look great!"
7 hours ago
Uncle John commented on Wanhavihtahousu's photo
Thumbnail

IMG_5132

"Cool!"
7 hours ago
A.D.EKER commented on AGP #'s photo
Thumbnail

AGP #533 - ''Beware of Wife''

"Thats a Beauty Alan whit the found riverwood and the Sign! i can hear it allready tearing it up!"
8 hours ago
Korrigan replied to Bill Andy's discussion Copper Hardware
"Did you click my link?  I'm seeing  lot of options."
9 hours ago
Mick Tickner commented on Mick Tickner's photo
Thumbnail

cbg2.4

"Ah so it's called a wing, thanks for that Doug.  And a bit ratty is exactly the look I…"
9 hours ago
Taffy Evans replied to Bill Andy's discussion Copper Hardware
"Hi, there is copper based paint available, and it actually creates a patina over time. I have not…"
13 hours ago

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->