Mike g's Blog – March 2011 Archive (4)

Making a four string neck part 5 (pressing the frets)

 

Once i sanded my fretboards how i like them I pressed and trimmed the frets

The pictures tell the story. I used to hammer the frets in  but that was a pain in the ass so I made this press. and Also made a few blocks and shims so I can press all the frets up to the high end.notice how I turned my kitchen table into my workshop. this makes my wife so happy.....not.        

 

dig the blurry pics…

Continue

Added by mike g on March 5, 2011 at 11:53am — 5 Comments

Making a four string neck part 4 (beveling the neck)

After I cut the frets I am ready to bevel the back sides of the neck on the bandsaw following some guide lines. the neck in cross section will look like the picture below.
 
I mark the neck .4 from the bottom and draw a line the whole length of the neck (lines with arrow… Continue

Added by mike g on March 5, 2011 at 8:29am — No Comments

Making a four string guitar neck part 3 (marking and slotting the frets)



Now I am ready to mark and slot the frets. I square up the nut slot with a nice square file and clamp a dummy nut in to measure from so there is no guessing where I'm measuring from. I charted out my fret distances on a piece of paper and marked the neck with a nice sharp pencil. Mine is a 24" fret scale.…
Continue

Added by mike g on March 4, 2011 at 8:29am — No Comments

Home Made Fret Press

I made this fret press and thought I would share it before I finish the neck making posts. I need to fret three necks so I broke down and made this press. It features 2 inch thich quarter sawn white oak. The whole unit is 21" long by 7-1/2 wide and weighs about forty pounds or more. I used a brick chisel for the press head. first I flattened and shaped the face of the chisel to accept the groove and then I…
Continue

Added by mike g on March 4, 2011 at 7:46am — No Comments

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Forum

Nut

Started by Bill Andy in Performances, How to Play, Lessons, Concerts. Last reply by Taffy Evans yesterday. 6 Replies

crossover guitar.

Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Apr 10. 14 Replies

Tune up songs

Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies

Duel output jacks

Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies

Latest Activity

Taffy Evans replied to Bill Andy's discussion Copper Hardware
"Hi, there is copper based paint available, and it actually creates a patina over time. I have not…"
1 hour ago
Wanhavihtahousu posted photos
2 hours ago
Ghostbuttons posted a photo

2 night project

Lots going on here. 22 inch scale, GDg. It’s made out of scrap. The neck is a bit of oak finish…
5 hours ago
BrianQ. replied to Bill Andy's discussion Copper Hardware
"Oh, yea , I forgot they have an economy line made overseas? Lace in the US did a limited edition…"
10 hours ago
Southern Ray replied to Bill Andy's discussion Copper Hardware
10 hours ago
Keith Rearick liked Gary O'slide's video
14 hours ago
Keith Rearick liked Poorness Studios's video
14 hours ago
Keith Rearick liked Mick Tickner's photo
14 hours ago
Keith Rearick liked Mick Tickner's photo
14 hours ago
Keith Rearick liked Mick Tickner's photo
14 hours ago
Keith Rearick liked Mick Tickner's photo
14 hours ago
Keith Rearick liked Mick Tickner's photo
14 hours ago

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->