Comment

Comment by Penny Nelson on September 7, 2012 at 3:07pm

Thanks BK, I have a friend who used to make lamps that has a very lonnnng auger bit somewhere... we are going to try drilling and putting a piece of threaded steel rod down there. my only other thought was to run a string from the top of the neck to the back of the pan to equalise the pressure somewhat but it would look naff so that is my last resort...

Comment by Penny Nelson on April 19, 2012 at 12:39am

It's the stain the strings put on the neck. I was going to run a brace up the back of the handle but cant figure out to do it with out having to take the turned edges off at the back so its flat so I can get a block of wood on there. Next thought which is what I prefer but will take a while. is drill up the inside of the handle about half the length at least and put one of those threaded rods in there but run it through the pan so it almost acts like a through neck. Also I would not suggest making a bass because the pounds of pressure pulling the neck forward is greater the heavier the guage of strings...

Comment by Calim on April 18, 2012 at 11:18am

argh...i hope you will find a way to resolve the prob !

 i've just get mine, still wait for piezo; it seems to be good but, well, i guess i'll have the same problem..

Comment by Penny Nelson on April 18, 2012 at 9:59am

lol its very early here... should read 407bug... geez!

Comment by Penny Nelson on April 18, 2012 at 9:57am

Well Calim, if you like whale song then yes. Because of its age I didnt want to replace the handle & it although I have got bracing inside the pan it is still quite unstable and impossible to keep in tune. bug404 & BeMuzic have the same problem with theirs. So I've walked away from it for the moment. I have a solution in mind that may work will keep you posted.

Comment by Calim on April 18, 2012 at 9:24am

pretty cool bedwarmer! i guess it must sound great !

Comment by Uncle John on February 1, 2012 at 1:40pm

Pretty patina Penny.

Comment by Penny Nelson on February 1, 2012 at 8:24am

oops John, sounds coming as soon as the lid is screwed on and I get home after work tonight...

Comment by Penny Nelson on February 1, 2012 at 8:23am

James that is the plan :D 

CW - thats the handle that came with the bedwarmer - its antique think its Aussie Red Cedar. and you forgot the all important Aussie Penny under the key (my signature).

Comment by James on February 1, 2012 at 3:42am

very nice build, soooo, now its time for a 3 part collaboration???? hmmmmm

• ‹ Previous
• 1
• 2
• Next ›
• Page