Comment

Comment by Sundt Productions on February 7, 2010 at 6:39pm

I made a change from the original set-up, kept cutting the strings... I'll post a photo of the new set-up, still refining them, but it's real close, I've been callin them "kegs" because it's like a tuning key and a tuning peg... they're 1/8" toggle bolt, bolts, with 1/8" nuts and lock washers, plus a locking nut the plastic inserts a size larger than the bolt... and just adjust for height, feed the string through the locking nut and trun the nut and string onto the bolt, then tighten the nut & lock washer on the back of the head, and turn the screw to tighten the string... still revising it, but it works as is and holds tune...Delete Comment

Comment by Sundt Productions on February 7, 2010 at 6:35pm

The nut/bolt set-up I've been calling tuning "kegs" because they're like a tuning key & a tuning peg... still refining it, but wanted something other than eye-bolts or store-bought...

Comment by Sundt Productions on February 7, 2010 at 5:12am

Strung & Sung... a few finish items and it's done,,,
It sounds great, what a wonderfully sweet, mellow, clear, and clean, voice... my goal was to make the best sounding guitar for the very least amount of coin, and I think I did it...

Comment by Sundt Productions on February 4, 2010 at 4:57pm

Total cost... $3.87 and that includes the string...