Comment

Comment by AGP # on February 24, 2024 at 11:51am

Thanks BQ", my first suspicions were the Metal Covered Pup interacting with the Tin Lid, you would think I would know better, after several unsuccessful attempts at Ghosting Humbuckers under Tin Number Plates etc over the years, I'm pretty sure the Humbucker I Ghosted in Build #311 was like the one in this Pic, I did try the same type in #523, no feedback noises, but it did sound very Tinny, so I opted for the Unghosted Single Coil instead :-)

Comment by BrianQ. on February 23, 2024 at 12:59pm

Covering a metal covered pickup with more metal will give unwanted eddy currents? I would’ve taken the cover off or used pick guard material to ghost under. The extra metal traps the magnetic current from spreading outward, sending it back at itself, creating a loop? Wax would do those cheap pups some good too? 

Comment by AGP # on February 23, 2024 at 11:55am

"Thanks A.D.", Yep!, sometimes things don't go quite as planned, but there's nearly always a solution to most problems, and fortunately I didn't have to dig too deep into my Wallett, the Hardware Store Pine only cost me $8.16AUD ;-D   

Comment by AGP # on February 23, 2024 at 11:49am

"Thanks UJ", the Round Soundhole was the result of the failed Ghosted Pomade Tin effort, and the two side Soundholes are one my Faves, and Yes!, a change of Pups cured the Squealy Squawks Problem, was originally going to use a Dark Oak Type Stain, but went with a lighter one to highlight the Pyrography Border, I've foud that I get my best Pics when its overcast, or the Sun has just down, or before it just comes up, and find my nostalgic old Australian Navy Flag suits the Pic of the Git better than the dark painted bench I use.  :-)

Comment by AGP # on February 23, 2024 at 11:36am

"Yes BQ", Horrible Feedback Noises when using the Distorted Amp Settings, and a very Tinny Unpleasant Sound when using the Clean Amp Settings, done a similar Ghosted Humbucker under a Pomade Tin Lid Build some time back, with no such problems. :-)

Comment by A.D.EKER on February 23, 2024 at 4:21am

Sometime's a plan comes together nicely ! and your right usaly electronics leaves you hanging and as you know there are allway's other solutions AGP#  ,and you been digging in the Wallet again ! but all and all this one comes out real sunny and Go Get Go ! nicely done Alan !

Comment by Uncle John on February 23, 2024 at 1:59am

I like the sound hole and pickup and the wood tone too.  You do a great  job on your photography and using the flags.  Sounds like you got the squeals and squawks worked out?

Comment by BrianQ. on February 22, 2024 at 6:32pm

Squealed & squawked? As in feedback?