The last build from my Son Jack’s Bedroom Cleanout
AGP #433 - “Glenlivet”
1 String Fretless Diddley Bow
Scale:584.2mm/23inches - String:.046NW - Tuned: A
The Whiskey Tube is Thick Cardboard with a Tin Top and Bottom, not sure what type of Timber the Neck is, it was part of two 3m long x 33mm diameter lengths of second hand Curtain Rail, I purchased cheaply many years back, from a Second Hand Junk Shop, the Neck Top and Bottom are Acacia Napkin Rings, again purchased from a 2nd hand Shop, the Neck was given 3 coats of Feast Watson Brush On French Polish.
A 35mm Piezo Disc, embedded in a plastic milk bottle top with Hot Glue, is screwed to the Neck inside the Tube, and is hardwired to the output Jack.
As I wanted to keep this $11 Build as cheap as possible, the main cost reduction was the addition of a $0.27 Piezo Disc, and as always, from my from past experiences, using one of these things was a bad mistake, because it sounds like shite, so there won’t be a Sound sample of it, until I add a Mag Pickup of some sort, and probably fill the Tube with some sort of foam to deaden the very Tinny sound it currently has.

Views: 66

Comment

You need to be a member of Cigar Box Nation to add comments!

Join Cigar Box Nation

Comment by AGP # on July 8, 2021 at 9:41am

"Thanx Pick", Looks Kewl, but sounds like Krapp at the moment.  :-D

Comment by AGP # on July 8, 2021 at 9:40am

Yes Doug, at 27 cents the price is is right, I've said it before, and say it again, I'll never use one again, even if they were Free!  ;-D

Comment by AGP # on July 8, 2021 at 9:36am

Yes BQ, its all about finding the right place to put the Disc Piezo, and after this build, I finally found that spot, its called a Garbage Bin  ;-D

Comment by the anonymous pick on July 8, 2021 at 6:36am

kewl ;-)

Comment by Doug Thorsvik on July 7, 2021 at 4:47pm

Another super creative build AGP! Very unique. The price is right on piezos, but they can be touchy!

Comment by BrianQ. on July 7, 2021 at 4:09pm

The problem with disc piezos is getting correct placement, they’ll never sound right if they’re not in the right place? Seems like they only amplify the stuff you don’t want them to? Put a “5 dolla make it holla” pickup in that bad boy and be done with it!

Comment by AGP # on July 7, 2021 at 10:35am

I agree BQ, I too don't care much for for Piezo's, especially the Discs, but every now and then I forget I dislike them, and use one of the stupid things, and I did try it through a stand alone Preamp I have, but it didn't help much. ;-{

Comment by BrianQ. on July 6, 2021 at 7:46pm

I don’t care for piezos either, but they get better with a preamp for sure? Especially the rod piezos?

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Forum

Nut

Started by Bill Andy in Performances, How to Play, Lessons, Concerts. Last reply by Taffy Evans 3 hours ago. 6 Replies

crossover guitar.

Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Apr 10. 14 Replies

Tune up songs

Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies

Duel output jacks

Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies

Latest Activity

Doug Thorsvik commented on Doug Thorsvik's video
Thumbnail

On Top of Spaghetti: 3D Printed Cigar Box Guitar

"I did not know that Kale! It’s a new song to me. I guess I don’t get around. It is very…"
56 minutes ago
Taffy Evans replied to Bill Andy's discussion Nut
"Hi Bill, I see your problem, a neck with no fingerboard, yuck. Anyway, you will have to cut a…"
3 hours ago
AGP # liked A.D.EKER's photo
5 hours ago
AGP # liked A.D.EKER's photo
5 hours ago
AGP # liked Poorness Studios's video
5 hours ago
AGP # commented on AGP #'s photo
Thumbnail

AGP #533 - ''Beware of Wife''

""Thanks 'UJ' & Doug, Needless To Say!, "She Is Not Amused" ;-D"
5 hours ago
BrianQ. replied to Bill Andy's discussion Copper Hardware
"There’s a company named Guyker that makes antique bronze tuners, they look like an old penny,…"
7 hours ago
Gary O'slide posted a video
7 hours ago
A.D.EKER commented on A.D.EKER's photo
Thumbnail

Decoration on the Spider & Frog

"Thanks Doug Glad you Do !"
7 hours ago
A.D.EKER commented on A.D.EKER's photo
Thumbnail

Decoration on the Spider & Frog

"Thanks UJ !  GG (high) D, G .  only i reversed the stings On top is not the G (low) but…"
7 hours ago
BrianQ. liked Poorness Studios's video
8 hours ago
BrianQ. liked Doug Thorsvik's video
8 hours ago

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->