Comment

Comment by AGP # on July 3, 2022 at 6:39pm

"Thanks BQ", It's in the too hard basket at the moment, and will look further into it a bit later on ;-{

Comment by BrianQ. on July 3, 2022 at 11:17am

 Check for a broken wire, overheating softens their temper & makes them brittle? If solder doesn’t flow within a 5 seconds:  1.you either need flux 2.wire or iron tip has contaminants or coating 3. or you’re iron temp is too low. Something that I’ve found with Flatpup’s is the closer to the strings the better, especially when you’re ghosting them? Good luck figuring out what happened :)