Starting first build.  Have looked at several YouTubers (Del Puckett, DaddyMoJo, etc.) and neither show videos of exactly what I want to build so that I’d pass measurements by here:

25” Scale Length with neck thru design

Separate fretboard

4” Headstock

1/2” from headstock cut to Nut

25” from Nut to Saddle

Saddle 2” from back end of cigar box

1” neck thru end of cigar box

Couple of questions:

1)  Is 1/2” enough space from the headstock to the Nut?

2)  Is 1” enough space at end of the box for holding the string ends?

3) How far should the heel wood extend into the box?

Is there anything else I’m missing?

Appreciate your help!

Mark

Views: 88

Reply to This

Replies to This Discussion

Welcome Mark!

If you accurately have 25" between but and bridge, the rest will pretty much fall in place.

I am happier with 4 1/2" headstocks. 

Placing the saddle  1/4 the length of your box [or perhaps even 1/3] is perhaps a better way to think of it than 2". Although for many boxes 2" may work well. Another consideration is simply the aesthetics of your box. I many times place the saddle where it looks good to my eye.

The heel in many CBGs is the end of the neck brace, so it really goes from the tail all the way you want. Again for me, more a matter of aesthetics than anything.

1" at the end for strings is fine. I have used a bit less at times and a lot more at other times.

There are dozens and hundreds of decent ways to do most of this, and that's not even counting the indecent ways. Don't overthink your 1st one. Its a stick in a box. But have fun, learn a lot and be sure to post pix when you're done!!

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Forum

Nut

Started by Bill Andy in Performances, How to Play, Lessons, Concerts. Last reply by Bill Andy 21 minutes ago. 4 Replies

crossover guitar.

Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Apr 10. 14 Replies

Tune up songs

Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies

Duel output jacks

Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies

Latest Activity

Bill Andy replied to Bill Andy's discussion Nut
"Also, do I need to ground the strings? Is there a way without soldering? Thanks"
21 minutes ago
Bill Andy replied to Bill Andy's discussion Nut
"Yes it is a Gitty neck."
26 minutes ago
Southern Ray replied to Bill Andy's discussion Nut
" Or, if you have no way of sending a picture, is it perhaps a CB Gitty fretted neck?"
57 minutes ago
Southern Ray commented on Cigar Box Nation's event Cigar Box Nation: York PA - A CBG Builder's Meet-Up
" I'd love to attend, but will never be that far north-east. To those that can: Have…"
1 hour ago
BrianQ. replied to Bill Andy's discussion Nut
"It’s customary to include a pic of the neck when you’re asking these kinds of…"
13 hours ago
BrianQ. liked Rob (Uker) Porras's photo
13 hours ago
Bill Andy posted a discussion

Nut

Just got a prefretted walnut neck, it does not have a lip to glue nut against, should i dado to set…See More
18 hours ago
AGP # commented on AGP #'s photo
Thumbnail

AGP 8 Stand Carousels

""Thanx A.D." I tried slowing down the number of builds, but I enjoy it too much! :-)"
20 hours ago
Rob (Uker) Porras posted a photo

Soresto ukulele

My wife actually asked me to build this. Every time the dog gets a new collar she tries to find a…
20 hours ago
3 String Blues posted a video

Delta Blues Freestyle Slide - MXL 990 Microphone Recording

Recorded with a MXL 990 Microphone that I bought used off ebay for 40 bucks. Music - from the webpage https://www.reddogguitars.com There is CBGs for sale...
20 hours ago
BrianQ. left a comment for Clydr
23 hours ago
BrianQ. left a comment for James C Bailey
23 hours ago

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->