#1 resource for Cigar Box Guitars, Free Plans, How-To, Parts & More!

My First CBG

Working on my first build! I'm primarily a singer, but I play guitar, banjo, and mando.
I've been planning on building awhile. I'd purchased a new cigar box to learn on, and an antique one for my second one. A couple days ago, I purchased a film canister from the 1950's, it's about 18" across, and I want to turn it into a banjo. This made me realize that if I was going to be purchasing things to build banjos, I should maybe get started on my first CBG.
I'm using hand tools only. No power tools!
Starting with a 3 string. Partages Cigar Box (Cuban) Oak neck. Ukelele tuners. I've got a bolt for the nut, just cutting the head off of it… no power tools remember? So I've cut half of it off, and going to finish it tomorrow. I'm still up in the air about what I'm going to use for a bridge. I have an eyebolt but I have a few other ideas as well.
I found some weird vents at the hardware store, and I'm using them for my sound hole covers. They're aluminum.
I'll hopefully have this playing tomorrow. I threw a pencil where the bridge is going to be and strung up one string, because I COULD NOT WAIT! I was super gratified to hear it making musical sounds!

0 members like this

Attachments:

IMG_6400.JPG, 133 KB
IMG_6399.JPG, 104 KB

▶ Reply to This

Replies to This Discussion

Permalink Reply by Sawbones on June 23, 2014 at 7:01pm

Looks good Gal!

▶ Reply

Permalink Reply by Caroline Dick on June 24, 2014 at 5:46am

Thank you!

▶ Reply

Permalink Reply by Sawbones on June 23, 2014 at 7:02pm

Very cool.

▶ Reply

Permalink Reply by Dan Mullen on June 23, 2014 at 9:55pm

I think you're on the right track. Keep up the good work. Oh yea, and stop cheating. You have to wait till all the strings are on it before you get to hear it!

▶ Reply

Permalink Reply by Caroline Dick on June 24, 2014 at 5:46am

Haha! Thanks! I love using hand tools but it's slooow, so I get a bit impatient!

▶ Reply

Permalink Reply by robert jones on June 24, 2014 at 1:17am

Like those sound hole covers, you might want to consider having your sound holes on the other end of the box on the next build.

LOL Don't listen to Dan, most of us "test" before fully stringing up.

▶ Reply

Permalink Reply by Caroline Dick on June 24, 2014 at 5:47am

Ah! Thank you, I wasn't sure which end and chose based on aesthetics.

▶ Reply

Permalink Reply by robert jones on June 24, 2014 at 9:53am

Works on either end but you will get some interference from the strumming hand/arm with the holes on the tail end.

▶ Reply

Permalink Reply by Caroline Dick on June 24, 2014 at 5:49am

I decided to do it all by hand because I thought it would be cool to go old school with a CBG. Also, I know that if my drill is hand drill, no one in my house is going to borrow the damn thing!

▶ Reply

Permalink Reply by Matthew Borczon on June 24, 2014 at 1:49am

Good work so far. When you get to the banjo go check out circuitsand strings. He has a cool tutorial for a film canister strum stick but his fret template is for banjo so just do not leave out any frets and you will have all you need. I made one from his site and there is a picture of it on my page. I used finishing nails for the frets. It worked out really well. Hope you enjoy the building.

▶ Reply

Permalink Reply by Caroline Dick on June 24, 2014 at 5:53am

Awesome! Thanks so much for the info! Just checked out your photo, looks fantastic! A friend and I were brainstorming about frets, I'd really like brass and would like to repurpose if I can. He came up with scale railroad track! I have some in my basement and am going to try pulling some apart and using it for my next build!