Replies to This Discussion

Permalink Reply by Derek Rose on February 5, 2017 at 7:30am

You don't have to compensate for slide playing. Since you don't press the strings down much when playing slide. Good luck with the build and there is plenty of help around here.

• ▶ Reply

Permalink Reply by Andre barszcz on February 5, 2017 at 7:37am

Thank you yes everyone has been very helpful i might put a picture on if it turns out ok

• ▶ Reply

Permalink Reply by darryl kernaghan on February 5, 2017 at 12:24pm

If you are just playing slide you can have your bridge square to the strings and compensate with your slide angle, but it is much more comfortable to build a bit of compensation at the bridge as it allows a more natural wrist position

• ▶ Reply

Permalink Reply by Andre barszcz on February 5, 2017 at 10:19pm

Thanks will look into this

• ▶ Reply

Permalink Reply by JL on February 7, 2017 at 5:07am

Get a clip-on tuner to find and mark the fret positions after you build and string it up.

• ▶ Reply

Permalink Reply by Andre barszcz on February 7, 2017 at 5:58am

Will do

• ▶ Reply

• ‹ Previous
• 1
• 2
• Next ›
• Page