I have some of the C.B.Gitty tuners with bushings that they describe as 8.2mm push in variety. I have watched the YouTube video elsewhere on the site but it doesn't say whether the holes should be exactly this size or if the hole should be a little tighter to keep them in place. I am using a maple headstock overlaid with a sheet of 2mm thick ebony, if that makes any difference to my options.
Many thanks from Bill.

Views: 161

Reply to This

Replies to This Discussion

There is no cure! Just enjoy the addiction....

The bushings are 8.2mm so they will tightly fit into an 8mm hole. For these type of tuners I drill 8mm for the depth of the bushing and then drill through with a different bit for the shaft (usually 6mm). You can use a resin mallet to hammer in the bushing when you come to fit the tuners.

I found the tuning pins are more stable without the bushes, drill 6mm and they will sit in firmly allowing turning without being loose (-:

Thanks everyone, very helpful!
All the best from Bill. :D
Drill a 5/16" hole. Then use a reamer to slightly enlarge the bushing end so it can be pressed in. Done right, no glue needed.

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Forum

Nut

Started by Bill Andy in Performances, How to Play, Lessons, Concerts. Last reply by Bill Andy yesterday. 5 Replies

crossover guitar.

Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Apr 10. 14 Replies

Tune up songs

Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies

Duel output jacks

Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies

Latest Activity

Daniel Ackermann liked King Harvest's photo
3 hours ago
Bill Andy replied to Bill Andy's discussion Copper Hardware
"No luck"
6 hours ago
A.D.EKER posted photos
7 hours ago
Korrigan replied to Bill Andy's discussion Copper Hardware
"Google it."
7 hours ago
AGP # liked Mick Tickner's photo
8 hours ago
AGP # liked Mick Tickner's photo
8 hours ago
AGP # liked Mick Tickner's photo
8 hours ago
AGP # liked Mick Tickner's photo
8 hours ago
AGP # liked Mick Tickner's photo
8 hours ago
AGP # liked Glenn Kaiser's photo
8 hours ago
AGP # commented on Doug Thorsvik's video
Thumbnail

On Top of Spaghetti: 3D Printed Cigar Box Guitar

""LOL", had forgotten all about that "Littke Ditty" from days of Yore, as…"
8 hours ago
AGP # liked Doug Thorsvik's video
8 hours ago

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->