Hey All,

 

Recently purchased a 6 string CBG kit off the bay from Tinyguitars. It came with a used guitar neck in good condition, Cigar Box pre-cut for the neck, three pieces of cherry wood cut to support the box where the neck and bridge will be attached, a bottom fed guitar bridge, and some  curtain rod rings (holes are already pre-drilled in the box). Game plan is to get it all assembled (obviously), add two humbuckers with a 5 way switch for coil shunting options, and possibly a piezo/preamp setup.

 

Now for some questions...

 

 I'm planning on using the tele style bridge that is pictured below.

 

 

I'm assuming I would glue the supports as pictured below.

 

 

I'm hoping to use string ferrules on the bottom of this, would I be able to mount them to the bottom under all of the support boards, or would that not work with the bridge support being glued to the lid itself.

 

More to come I'm sure. =)

 

Thanks!

Kevin

Views: 473

Reply to This

Replies to This Discussion

Julian: That's my concern as well. More and more I think I'm going to just have to do this with the top loader and fasten everything together for strength. I'll likely set it up like a hollowbody wiring harness so I can get to all the wires if need be.

Don: Initially that was the plan, but the more I look at it, and the more input I get from you guys I'm thinking that's just not going to be feasible.

Mark: Yup, I was eyein' your pics last night. I kinda wondered if that's what you had done with your bridge.=)

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Forum

Nut

Started by Bill Andy in Performances, How to Play, Lessons, Concerts. Last reply by Taffy Evans yesterday. 6 Replies

crossover guitar.

Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Apr 10. 14 Replies

Tune up songs

Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies

Duel output jacks

Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies

Latest Activity

Wanhavihtahousu posted photos
30 minutes ago
Ghostbuttons posted a photo

2 night project

Lots going on here. 22 inch scale, GDg. It’s made out of scrap. The neck is a bit of oak finish…
3 hours ago
BrianQ. replied to Bill Andy's discussion Copper Hardware
"Oh, yea , I forgot they have an economy line made overseas? Lace in the US did a limited edition…"
8 hours ago
Southern Ray replied to Bill Andy's discussion Copper Hardware
8 hours ago
Keith Rearick liked Gary O'slide's video
12 hours ago
Keith Rearick liked Poorness Studios's video
12 hours ago
Keith Rearick liked Mick Tickner's photo
12 hours ago
Keith Rearick liked Mick Tickner's photo
12 hours ago
Keith Rearick liked Mick Tickner's photo
12 hours ago
Keith Rearick liked Mick Tickner's photo
12 hours ago
Keith Rearick liked Mick Tickner's photo
12 hours ago
Keith Rearick liked Glenn Kaiser's photo
12 hours ago

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->