I've long admired the Gibson hollow-body and semi-hollow-body line of guitars like the ES 330. They just look like a proper blues rig.

Since I was between builds and had tuners, pickups, frets, etc sitting around I figured "Why not build a 3-string Gibson tribute guitar". So I found a nice image of a Gibson and resized it to use as a pattern.

Since I don't want to be accused of being a "Chit head" by Uncle John, I've attached a few build photos for reference.

The sides were jig-sawed from 3/4" Poplar. Two courses glued up to create a body that was 1 1/2" deep.

The top and bottom were cut from 1/4" Poplar boards that were thinned to 3/16". The top is glued in place while the bottom attaches with screws. The F-holes were cut with a little hand held hobby saw. Not my favorite part of the job.

The neck is tapered from 1 1/2" where it enters the body to 1 1/8" at the nut. The fret board is screwed in place so it can be removed if necessary. A length of piano wire is used as a zero fret.

The sunburst finish was done with an airbrush. First, a bright yellow stain was applied to the entire body. This is what causes the finish to have warm depth. Minwax Sedona Red stain was airbrushed to create the orange/red fade. Common black latex from Home Depot was thinned and airbrushed to create the black fade. Finally, Orange shellac was airbrushed over the finish to stabilize the finish before several coats of shellac were hand rubbed to create some depth and protection for the finish.

The guitar has a 24" scale and uses a single wound, four-pole bass pickup that I picked up as a two pickup set wired to act as humbucker. Used as a single wound, I was worried about possible hum, but here is absolutely no hum from the pickup. I have a one-meg tone control with a 0.047mf cap.

Still sorting out preferred string diameters, but so far, it is a good player and my tribute to a Gibson blues classic.

Views: 1030

Attachments:

Reply to This

Replies to This Discussion

Excellent job!! Needs another string though LOL

Wait!! I think I have on somewhere in the shop............

if ya didn't he would've called you chit head

nice work work.

I've done similar awhile back.

You can count on it, John

      That is a real beauty. I do love the airbrush work,but I really am crazy about the Li'l Gib inlay.Fret marker dots are about as wild as I have ever gotten. Round dot round hole,"Bam",it is in. What you have there is absolutely perfect. It gets your point across to someone who would not know much about guitars, but would instantly recognize your work as a tribute. I like the work in progress photos Great work Tom. 

Thanks, Hound.

I am quickly warming up to Li'l Gib. Did some string bridge changes yesterday and she plays better. Very good for fingering notes and not bad for slide. Compared to my cigar box based guitars, this one has an unusual amount of sustain, which sounds good. I'm just not sure why it has the added sustain. I'll keep looking for the source so I can do it again.

That is a beautiful guitar. Plain and simply a piece of art. Have you made a video yet? I would love to hear the tone it puts out. Great work.

Thanks Jeffrey. No video yet. I'm still tweaking action height and string selection, but so far the thing I notice most is that it has a great deal of sustain. Not sure if it's a result of the box or maybe the pickup. Either way, it is nice to hold a note and have it last.

      After you figure out what size strings you need, I believe I would spring for a set of gold ones like Oily Sprague put the link to the other day. I think it rates a set.

just bought those gold strings this morning .

put an offer in and it was accepted.

Ill put a write up on them as well info on my new olive git.

THat is a fine looking instrument and thanks for the nice photos and details!

You chit-head.  Wonderful job.  I am glad I found this. 

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Forum

crossover guitar.

Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Apr 10. 14 Replies

Tune up songs

Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies

Duel output jacks

Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies

Latest Activity

Randy S. Bretz posted a photo
10 seconds ago
Keith Rearick liked David Hopkins's photo
18 seconds ago
Keith Rearick liked David Hopkins's photo
38 seconds ago
Keith Rearick liked David Hopkins's photo
1 minute ago
Keith Rearick liked David Hopkins's photo
1 minute ago
Keith Rearick liked Darryl Tuttle's photo
1 minute ago
Doug Thorsvik posted a video

Shout with Joy to God: 2-String Chugger License Plate Cigar Box Guitar

Cigar Box Guitar Slingers - Spokane, 199th Zoom Mtg 04/22/24. Only 1-finger chords, free songbooks here: https://www.cbgslinger.com/download CBG SOF Songbook...
1 hour ago
A.D.EKER left a comment for David Hopkins
"They look a lot like the Roger Farrington creation's from 1980!"
2 hours ago
A.D.EKER commented on A.D.EKER's video
Thumbnail

All You Got to do is put your Mind to it ! BCB - A .D .Eker 2024

"Yes he was ! Uncle John ! thank you for the like and kind comment ! Dang me !"
2 hours ago
Uncle John commented on Gary O'slide's video
Thumbnail

Acoustic folk box cigar box guitar @RhialtoPurple

"Nice.  Bright and sunshiny.  Feeling good music.  Thanks!"
3 hours ago
Uncle John commented on A.D.EKER's video
Thumbnail

All You Got to do is put your Mind to it ! BCB - A .D .Eker 2024

"Roger was extra special.    And fun. Wailing harp there, A.D.!    Good tribute!"
3 hours ago
A.D.EKER commented on A.D.EKER's video
Thumbnail

All You Got to do is put your Mind to it ! BCB - A .D .Eker 2024

"    You can Rollerskate in a Buffalo Herd !!"
6 hours ago

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->