Comment

Comment by Tramp Guitars on November 1, 2015 at 3:47am

I'd like to hear the pickup driven

Comment by Uncle John on December 19, 2014 at 2:10am

Nubley.   Good ideas and you showed off the pup that I was already thinking about for a four string. 

 

But how do you wire it to a jack?   I assume that cable comes with a male plug to go in a jack. 

Comment by Ron "Oily" Sprague on December 19, 2014 at 2:05am

Shane,

Neat idea. If you don't have a grinder or belt sander, a few minutes hand work with a flat file would accomplish the same thing.

In looking at this, I thought of another mod, that involves cutting a slightly larger-than-pickup-size, oval hole in the box top. You inset the pup down a few mm in the box, and use the clips to rotate and hold it in place, no screws needed. This allows the wings to ride on top of the box for support. This would work better for a neck through that has already been relieved below the box top.

Comment by Clock The Wolf on December 18, 2014 at 7:34pm

Whack it with a rubber mallet?