Hi guys. Waiting for my machine heads to arrive before I can carry on with my first build so with christmas coming up I thought I'd make some presents. Seen the beer can mic's some people make and thought I'd give it a bash. My cousin is in to beatboxing so thought it would be the perfect gift. I'd read somewhere that headphone speakers can be used as the element and I had a working but tatty pair of old school phillips headphones lying about, ones with a volume pot on each side and a stero/mono switch. I figured I could just take one side leave it all wired up to the volume pot, rewire the ground in to the jack lead and all would be well so I soldered it up and plugged it in and got nothing, tried wiring it up without the volume pot and got nothing, well I think there was something coming through when it was turned up really loud but nowhere near microphone output.
Electronics aren't my strong point. I did a bit of circuitry at high school and I can follow a wiring diagram but I don't understand a lot of the advanced stuff and I'm useless at troubleshooting.
Would the volume pot need to be wired up opposite to how it was in the headphones as the current is going the other way or would this make no difference? the volume pot says 300ohms on it, is this enough? Does anyone have a wiring diagram or a simple explanation for these things. I don't know what this type of microphone would be called and as there are so many diferent types its a nightmare trawling through google for relevant stuff.
So I thought I'd ask the wise heads on here as you lot have already given me so much help without even trying, I've read back to 90 pages ago on here for info on my first build and a lot of you have given me help in your previous posts without me even having to ask!
Thanks in advance guys
Tags:
I think the headphones aren't going to be loud enough because they're on the small side with the windings and the magnet. I did a quick search on beer can microphones and one used an old telephone mic and another used a piezo.
There is a diagram in Bart Hopkin's book , Getting a Bigger Sound, for a condensor mic, using a few dollars of parts from Radio Shack and a 9V battery. I made one and it sounds quite good.
cheers for the reply Skeesix, was going to give up, ripped an alarm clock apart for the piezo disc which worked but i thought i'd give it another go. took everything apart cleaned all the contacts and rewired it to a new jack without the volume pot and it works like a charm! So headphones do work, not sure how well until i rig it all up to a pre-amp. I'll post up how it goes.
Thanks again
Hey Skeesix,
I saw your response and was wondering if you had the diagram available for that mic. I am looking to install it in a cigar box so i would need an on off switch and vol pot. Cant find any real good designs out there....
Thanks!
-Randy
If you mean the condensor mic, I think that would fall under Bart's copyright, so I can't give it away - you would have to buy the book to get it. However, you can't go wrong with this book - all kinds of neat info on pickups and microphones for various musical instruments, with direct applications for cigar box guitars.
http://windworld.com/products-page/books-cds/
OR
http://www.amazon.com/Getting-Bigger-Sound-Microphones-Instrument/d...
Actually, using an old telephone "earpiece" is what mic builders use. The mouth piece is less effective if it works at all. I have posted one that I made a while back. It might be in my gallery. It works great and emulates the old mics used with harmonicas. I'll try to find the pic.
Thanks Brother! I have seen a few desgins useing the Mic portion of the handset I noticed in this case that the mic would require a battery in order to work properly I wanted to use this on a "cigar" box guitar I am toying with
Thanks again!
I build soup can microphones all the time. I glue a piezo to the bottom end of the can and wire it to an out put jack.
*Warning* don't let the piezo or the jack touch the metal or there will be a short. I put tape on the bottom of the can. Others use enough glue that the piezo doesn't touch. I use rubber grommets from a hardware store so the jack won't touch the can. You can cover the open end of the can any way you like. Some use drain covers; I use burlap.
I made this out of an old hose you hold too shower with...and the transmitter element from a old phone...and never had any issues. Although it sounded a bit like an old radio....I liked it.....so did someone else..so I sold it....lol.
I had too hot glue a wooden plug inside...with a pre drilled hole for the lack plug...and ,and a wooden washer on the outside too mount the jack plug....worked out ok.
Interesting so this was just hard wired to a 1/4 output jack? Everything I have seen indicates that can be done with the earpiece but not the Mic..I really dig the design you came up with man it is very cool I am looking for a design that incorporates a telephone Mic a vol controller and out put jack got anything like that? Thanks again!
Old rotary telephone receivers make great mic elements...just wire it direct to a 1/4" input jack..also C.B handset elements work great.....http://www.cigarboxnation.com/photo/albums/custom-harmonica-mic-s
Started by J. D. Woods in Performances, How to Play, Lessons, Concerts. Last reply by Southern Ray on Friday. 8 Replies 1 Like
Started by Southern Ray in Other stuff - off topic, fun stuff, whatever. Last reply by Southern Ray on Friday. 6 Replies 0 Likes
Started by J. D. Woods in Performances, How to Play, Lessons, Concerts. Last reply by BrianQ. on Thursday. 4 Replies 0 Likes
Started by Rich Butters in Building Secrets, Tips, Advice, Discussion. Last reply by Crazed Fandango Apr 22. 4 Replies 0 Likes
Started by Nomad Jack in Performances, How to Play, Lessons, Concerts. Last reply by J. D. Woods Apr 17. 7 Replies 2 Likes
Started by Moritz Voegeli in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 14. 6 Replies 2 Likes
Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Apr 10. 14 Replies 3 Likes
Started by Tom T in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 9. 9 Replies 0 Likes
Started by Southern Ray in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 4. 7 Replies 1 Like
Started by Timothy Hunter in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Mar 27. 1 Reply 2 Likes
Started by Taffy Evans in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Mar 10. 1 Reply 3 Likes
Started by Cigar Box Nation in Feature Articles. Last reply by BrianQ. Mar 9. 4 Replies 3 Likes
Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies 1 Like
Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies 0 Likes
Started by Ken I in Building Secrets, Tips, Advice, Discussion. Last reply by Brian partington Mar 8. 8 Replies 0 Likes
Started by Southern Ray in Cool gear discussion - that's not cigar box related. Last reply by Southern Ray Mar 6. 5 Replies 0 Likes
Started by Taffy Evans in Other stuff - off topic, fun stuff, whatever. Last reply by Taffy Evans Mar 5. 4 Replies 2 Likes
Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Carl Floyd Mar 1. 15 Replies 0 Likes
Started by Joe in Performances, How to Play, Lessons, Concerts. Last reply by Carl Floyd Feb 29. 13 Replies 0 Likes
Started by Chance in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Feb 22. 12 Replies 1 Like
Posted by Vlad on March 31, 2024 at 11:48pm 0 Comments 1 Like
Posted by Vlad on March 6, 2024 at 2:32am 5 Comments 2 Likes
Posted by billy jones bluez on February 28, 2024 at 2:09pm 0 Comments 0 Likes
Posted by billy jones bluez on February 17, 2024 at 11:00pm 0 Comments 0 Likes
Posted by Vlad on February 11, 2024 at 1:06am 1 Comment 1 Like
May 11, 2024 from 11am to 8pm – Speakeasy Grill
0 Comments 0 LikesMay 30, 2024 from 6:30pm to 10pm – The Casual Pint of Huntsville
0 Comments 0 Likes© 2024 Created by Ben "C. B. Gitty" Baker. Powered by
Cigar Box Nation is presented by C. B. Gitty Crafter Supply, your one-stop-shop for Cigar Box Guitar parts and accessories!