Replies to This Discussion

Permalink Reply by Yankee Dog on February 20, 2014 at 10:37am

I have a two stringer made out of 3/4 square and a three stringer out of 1" square. I believe it will hold up better than the common 1x2 oak.

 

 

• ▶ Reply

Permalink Reply by Jantan ux on February 21, 2014 at 3:33am

Have you got any pictures Yankee Dog

• ▶ Reply

Permalink Reply by Yankee Dog on February 21, 2014 at 7:40am

Here is the 2 string. It is my motorcycle travel git. The neck rides on the outside. the body rides inside a side bag. Took a 5400 mile trip last summer, works great in is a blast to play. Gets lots of looks.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

here is the neck strapped to the outside. held in place with two bungie cords which put way more pressure than a couple or three strings. Didnt warp nary a bit, rain or shine.

 

• ▶ Reply

Permalink Reply by Jantan ux on March 9, 2014 at 9:50am

Working on my diddley bow.  I can't fit potentiometer inside the tube very well. Inside diameter is 20mm.

• ▶ Reply

Permalink Reply by Michael Fred Johnson on March 11, 2014 at 4:05am

How about using a miniature slide type pot ?

• ▶ Reply

Permalink Reply by Jantan ux on March 11, 2014 at 7:56am

Maybe some mini pot.

https://www.elfa.se/elfa3~eu_en/elfa/init.do?item=64-349-81&toc...

https://www.elfa.se/elfa3~eu_en/elfa/init.do?item=64-352-46&toc...

https://www.elfa.se/elfa3~eu_en/elfa/init.do?item=64-095-69&toc...

I think best solution is minibox attached to the tube with pot and jack inside.

• ▶ Reply

Permalink Reply by Jantan ux on March 11, 2014 at 8:20am

Any loose part in tube effects sounding.

• ▶ Reply

Permalink Reply by Jantan ux on March 12, 2014 at 8:46am

Damn. Can't find right size box. I need to fit in open 6.35 female jack with male jack, cabels and pot.

64x40x30mm is great size. I have that size box. problem is that inside is too small.

72x44x25 is great also. Problem is that I don't know inside dimensions. 

• ▶ Reply

• ‹ Previous
• 1
• 2
• Next ›
• Page