#1 resource for Cigar Box Guitars, Free Plans, How-To, Parts & More!

3 String Fretless Reso Cigar Box Guitar - New Song "Lay My Hat Down"

Lots of my music available here https://bemuzic.bandcamp.com/

I came in late on the last verse, but I only finished writing it a few hrs before filming it, so I wasn’t likely to get through it with no mistakes!

I’ve mainly put it on to show fellow Cambridge busker Banjo Nick, as I wrote it with the intention of us playing it together when we meet up busking, if he likes it.

GUITAR INFO

It’s also to show my newly finished 3 string Cigar box reso.
It’s the first guitar I’ve made that isn’t a through neck, so that was all a bit new. I was intending to fret it, but loved the wavy lines going up the neck (walnut) and didn’t want to cut across it, so decided to leave it fretless. I’m also really enjoying playing something fretless for a change…a lovely old time sound.
I was intending to put a flatpup on it as well as a rod piezo in the biscuit bridge, but decided to leave that off as I like the piezo sound as it captures the resoness (not a word??!)
The scale length is 23”
The strings are Zebra DR acoustic/electric. I bought them when I thought I was going to put a magnetic as well as piezo, as they work with either, and left them on as I liked them. I’ve used the D,G and B strings (24,32,42)
The nut and bridge are unbleached bone. The reso cone is a 5 1/2" one made by Charles Atchison. I bought two, so I may make a similar one, but fretted at some point. You can buy them here https://www.cbgitty.com/cigar-box-guitar-parts/resonator-parts/5-5-inch-lightning-spun-aluminum-cigar-box-resonator-cone-by-charles-atchison/ I also vaguely followed his building instructions http://www.charlesatchison.com/#!build-a-resonator-cigar-box-guitar/c1uyj
The tuners are these from Chickenbone John http://chickenbonejohn.myshopify.com/products/epiphone-deluxe-machineheads-2-1 I really like them, both for the nice retro look, and also they turn nice and smoothly. Much nicer than the cheapy eBay ones I’ve been using. The slide is also one from Chickenbone John - one of these http://chickenbonejohn.myshopify.com/products/daddario-chromed-brass-slide It's worth having a browse on Johns page as he has some good quality stuff! I got this slide for busking as I keep breaking glass ones : -/ Like it a lot but wouldn't use it for recording as when playing a guitar with a magnetic pickup I get a slight crackle. Can't notice it while busking though, with street noise etc.
I'm most often tuned A,E,A, but for this song I went down to G,D,G as I thought it’d be better for Nick in G?

Filmed with a GoPro Hero 4

25 members like this

Get Embed Code

Tags:

You need to be a member of Cigar Box Nation to add comments!

Join Cigar Box Nation

Comment by Preston J. Laisure on April 12, 2016 at 4:52pm: One of your best, if not the best.

Comment by Preston J. Laisure on April 12, 2016 at 4:52pm: One of your best, if not the best.

Comment by Bruce on April 12, 2016 at 3:44pm: Nice sounding guitar too.

Comment by Bruce on April 12, 2016 at 3:40pm: Great song! All your songs are very nice. I enjoy them.

Mind if I ask a looper question? On the looper I use the first record sets the length of the loop. You can't dub something of a longer length over top of it and make it work out. Apparently your's lets you dub over a short loop, since you began with 4 beats of tapping the guitar, and then recorded a longer segment over top of it. What kind a looper system are you using that lets you do that?