I have been working on affordable and accurate fret slotting jig and this is what I come up with.

After a couple iterations it is made in 5mm laser cut acrylic, and it is actually very sturdy.

If anyone is interested there files…

Hi guys,

Just a quick view of the process to make a plectrums of wood:

First we cut little wood blanks and add masking tape to the sides and apply super glue to hold them together.

Its the trick in this video.

Them glue the printed shape on top and sand it to shape with a sanding block. In this case the shape is Jazz III.…

So this is my latest build, a telecaster based guitar.

Body and neck is AGBA

Fretboard is Bloodwood

Pickup covers are Olivewood

Body stripe and headstock back veneer is Pau Ferro

Knobs are Pau Ferro with olive woo tops

and the backcover has a piece of IPE(holding the strings)

Pickups are Tonerider

Here are some photos of this build:

First steps are to remove excess wood and get the basic shape.

I…

This is a simple kit I´m perfecting with a friend so we can do workshops with kids so they can personalize and assemble a…

This guitar has a plywood neck, IPE fretboard, oak headstock and bridge.

Finished it with shellac.

it has no decorative elements, but I might add some later:

And this is how it sounds (before the…

I was in the need of having some kind of jig not only where I could do some fret work, but that I could also use to do other operations, or just lay down the guitars.  The inspiration is from Stewart-MacDonald fretting jig. But since its price is way too much for…