I've always been fascinated with the sitar.  The buzzing, droning and string bending sounds are unlike anything out there.  If the Beatles used sitar, I wanna use sitar! 

Recently, I replaced the bridge on a cigar box guitar with a real sitar bridge and was blown away.  We'll get to that, but first, a quick look at my sitar obsession and attempts to get the tones on a cigar box guitar.

In the past, I've used the flat side of bone slides to get the buzz. A bleached dog bone from the pet store was used as a slide in my song, "Bone to Pick" from my album, Jug Fusion.

I've also used simple 1/5" buttons from StubbySlide.com to provide the buzz, as shown in this video.  (If you want to get a sitar sound today, just get a button and rip off some world music leads like this):

Sitars get their buzzing sound from a flat bridge made out of bone, called a 'jawari.'  There are two jawari bridges on sitars, the 'tar jawari' which is higher and is used for the strings that are fretted, and the 'tarab jawari' bridge which lifts and buzzes the sympathetic strings.

It was the lower bridge that I purchased for this new experiment.  It's sold as "Banjira Sitar Sympathetic Bridge" on Amazon.  (Link) 

The bridge is just under 1/2" high and has two little wooden legs on the bottom.  I found it to be the best choice for replacing a cigar box guitar bridge, as seen on this instrument built by Casey Baron.  In the video, you will see me tweaking the angle of the bridge to get the best buzz.  This is common with sitars and there are master instrument makers in India known for their expertise in getting the maximum buzz.

Watch the video and then scroll down for more info.

Some thoughts on the tone of this cigar box sitar:

Because of the guitar strings used on this instrument, the sitar bridge sounds more like a 1960's Coral Electric Sitar than a real Indian sitar.  I plan on making a dedicated cigar box sitar that uses thinner strings.  This chart for a pack of La Bella Sitar Metal Loop End Strings shows just how light the gauges are:

Using this chart, I can simply purchase bulk guitar strings at CBGitty.com to approximate the traditional sitar.  I also plan on using jumbo/high fretwire for easy bends.

Do you have any ideas or thoughts on building a cigar box sitar?  Post them below.  (Remember to hit the HTML tab in the text box before posting your response.  This old website is cranky and has a few wonky ticks to it.)