Replies to This Discussion

Permalink Reply by Big Guy Blues (Morgan) on June 28, 2011 at 5:55am

Here's how I did finishing nail frets: http://www.cigarboxnation.com/photo/finishingnailfrets-1?context=user 

 

I bent the nails in to an "L" shape then tapped them into small holes I drilled along the fret board. I really like the way it turned out and works great.

Mike Izzo said:

I'm having trouble with frets that installed - they were fine for a while, but now they're trouble. I was considering pulling them all and using nails and this is the first build I've seen with them.  How are they to play?  What kind of nails did you use?

Paul Nelson said:

Thanks guys! Rand, I'm using oak for everything. I was concerned about the nail points too, but I dull them down just slightly before putting them on and it works just fine! I really like the way it looks, I probably get more complements on the frets than anything else! I'm considering going to fret wire, but I hate to give up the folksy appeal of the nails...

• ▶ Reply

Permalink Reply by Mike Izzo on June 28, 2011 at 5:56am

Great idea - thanks!

Tim Agapie said:

I find the wire hangers work great!

• ▶ Reply

Permalink Reply by Paul Nelson on June 28, 2011 at 12:22pm

These are 1 1/2" brass nails, but I usually use just plain 1 1/2 6d finish nails. They play great! A little big, kinda like playing with super jumbo frets, but I like them. Just be sure to dull them down a little first, it's hard to after they are glues in.

Mike Izzo said:

I'm having trouble with frets that installed - they were fine for a while, but now they're trouble. I was considering pulling them all and using nails and this is the first build I've seen with them.  How are they to play?  What kind of nails did you use?

Paul Nelson said:

Thanks guys! Rand, I'm using oak for everything. I was concerned about the nail points too, but I dull them down just slightly before putting them on and it works just fine! I really like the way it looks, I probably get more complements on the frets than anything else! I'm considering going to fret wire, but I hate to give up the folksy appeal of the nails...

• ▶ Reply

Permalink Reply by Paul Nelson on June 28, 2011 at 12:23pm

That looks great, I might give that a shot soon...

Big Guy Blues (Morgan) said:

Here's how I did finishing nail frets: http://www.cigarboxnation.com/photo/finishingnailfrets-1?context=user 

 

I bent the nails in to an "L" shape then tapped them into small holes I drilled along the fret board. I really like the way it turned out and works great.

Mike Izzo said:

I'm having trouble with frets that installed - they were fine for a while, but now they're trouble. I was considering pulling them all and using nails and this is the first build I've seen with them.  How are they to play?  What kind of nails did you use?

Paul Nelson said:

Thanks guys! Rand, I'm using oak for everything. I was concerned about the nail points too, but I dull them down just slightly before putting them on and it works just fine! I really like the way it looks, I probably get more complements on the frets than anything else! I'm considering going to fret wire, but I hate to give up the folksy appeal of the nails...

• ▶ Reply

• ‹ Previous
• 1
• 2
• 3
• Next ›
• Page