Replies to This Discussion

Permalink Reply by Matt Quinney on March 17, 2016 at 9:32am

Well, my two heads don't have heads on them, fleshed or otherwise, but here they are............

Attachments:

• My two heads.jpg, 90 KB

• ▶ Reply

Permalink Reply by Fomhorach on March 21, 2016 at 11:23am

Pure and simple. Yes they are heads and I like the zero fretting

• ▶ Reply

Permalink Reply by Matt Quinney on March 22, 2016 at 2:53am

Thank you!

• ▶ Reply

Permalink Reply by Jim_N on March 17, 2016 at 12:07pm

Attachments:

• headshots 2.png, 1.4 MB

• ▶ Reply

Permalink Reply by Jim_N on March 17, 2016 at 12:15pm

• ▶ Reply

Permalink Reply by Jim_N on March 18, 2016 at 9:49am

• ▶ Reply

Permalink Reply by Frank Carr on March 17, 2016 at 2:27pm

Here's a diddley bow I finished this week. I decided to try out a rather radical 45 degree angle on the headstock.

• ▶ Reply

Permalink Reply by Daryl on March 18, 2016 at 6:24am

I get these ideas and then get carried away.

Attachments:

• image.jpg, 1.6 MB

• ▶ Reply

Permalink Reply by Jim_N on March 18, 2016 at 9:30am

 *Ditto!*

• ▶ Reply

Permalink Reply by Shawn on March 18, 2016 at 6:53am

Nice and simple is my design

Attachments:

• image.jpeg, 267 KB

• ▶ Reply

Permalink Reply by Shawn on March 18, 2016 at 6:32pm

Yah it's a pain to get it glued down but so worth the effort

• ▶ Reply

Permalink Reply by Nathan Binns on March 18, 2016 at 8:15am

Here's my design. I use etched copper for a veneer. Left is a Uke and right is a dog bowl resonator. The "verb" portion comes from two springs stretched inside of the bowl. 

• ▶ Reply

• ‹ Previous
• 1
• 2
• 3
• Next ›
• Page