Hand saw.

I was ready to throw out an old hack saw blade but then I took a closer look at it. The blade was worn out in the middle, not the last few inches on each end near the saw frame. So , I took the blade, snapped the blade in half in my vice ( just a few wiggles back and forth and it broke in two) and wrapped some tape around the dull area to make a handle. Now I have two handy little saws! Works great for cutting boxes for the neck and many other uses.

Views: 263

Replies to This Discussion

Permalink Reply by Wade on April 9, 2012 at 12:28pm

Permalink Reply by rusty case on August 27, 2012 at 4:12am

Yup!

We tape 'em up quick for odd little tasks on the jobsites, to use in a tight space, to cut or use as a scraper.

...now you've got me to think I could also use try as the tines for a finger piano (kalimba).

Tnx!

rc

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources

Discussion Forum

Cigar Boxes From Tobacco Shops - Still Free or very low cost

Started by Wilda Connell. Last reply by BrianQ. Aug 5, 2020. 1 Reply

The Effects of Coffee, in a good way, folks........

Started by BrianQ.. Last reply by Wilda Connell Aug 5, 2020. 7 Replies

Low Budget Sanding Tool

Started by BrianQ.. Last reply by Order99 Jun 9, 2020. 3 Replies

Nails for frets?

Started by Mike. Last reply by Alan Robinson Aug 1, 2017. 8 Replies

Flea market finds

Started by Mike Jul 24, 2017. 0 Replies

Not just a lolly stick

Started by Wade Jan 2, 2015. 0 Replies

Save that box screw up!

Started by Wade. Last reply by Thomas "Duck" Petry Dec 3, 2014. 2 Replies

CB string height gauge

Started by Wade. Last reply by Wade Jul 9, 2014. 2 Replies

Recycled stuff

Started by Keith 66 Jun 11, 2014. 0 Replies

Free recycled Piezo pickups

Started by Wade. Last reply by Rob Brighton Jul 2, 2013. 19 Replies

Joining Lumber

Started by Where's Uranus?. Last reply by Mark Lindsay Jun 4, 2013. 8 Replies

Fretboard radius

Started by Wade. Last reply by rusty case Feb 11, 2013. 1 Reply

Free grounding foil

Started by Wade Feb 10, 2013. 0 Replies

Free Fret dot markers

Started by Wade. Last reply by Mark Lindsay Feb 3, 2013. 23 Replies

Recycled tonewood

Started by rusty case. Last reply by rusty case Nov 21, 2012. 13 Replies

Low $ substitute for banjo face?

Started by rusty case. Last reply by rusty case Nov 18, 2012. 6 Replies

Cheapo strings

Started by Karl G. Siewert. Last reply by rusty case Aug 27, 2012. 4 Replies

Hand saw.

Started by Wade. Last reply by rusty case Aug 27, 2012. 2 Replies

Tennis, anyone?

Started by Order99. Last reply by Order99 Aug 17, 2012. 4 Replies

1/2 Priced Nuts and Saddles

Started by Claude. Last reply by Order99 Apr 8, 2012. 10 Replies

Blog Posts

I'll be fashionable this summer =)

Posted by Vlad on March 31, 2024 at 11:48pm 0 Comments

Everyone can make CBG. And I did it =)

Posted by Vlad on March 6, 2024 at 2:32am 5 Comments

.✨. Cover Me ..♪♫•*¨*•. ~ the Delta Blues Outlaws

Posted by billy jones bluez on February 28, 2024 at 2:09pm 0 Comments

Q&A with Arkansas-based talented blues musician Billy Jones, one of the very best authentic modern artists

Posted by billy jones bluez on February 17, 2024 at 11:00pm 0 Comments

Big Power Bank for Small CBG =)

Posted by Vlad on February 11, 2024 at 1:06am 1 Comment

Latest Activity

AGP # liked Mick Tickner's photo
Thumbnail

cbg1

18 minutes ago
AGP # liked Mick Tickner's photo
Thumbnail

cbg2.4

19 minutes ago
AGP # liked Mick Tickner's photo
Thumbnail

cbg3.2

19 minutes ago
AGP # liked Mick Tickner's photo
Thumbnail

cbg4

21 minutes ago
AGP # liked Mick Tickner's photo
Thumbnail

tinydiddlybow

21 minutes ago
AGP # liked Glenn Kaiser's photo
Thumbnail

MAY 2024 Take Down Diddley

22 minutes ago
AGP # commented on Doug Thorsvik's video
Thumbnail

On Top of Spaghetti: 3D Printed Cigar Box Guitar

""LOL", had forgotten all about that "Littke Ditty" from days of Yore, as…"
23 minutes ago
AGP # liked Doug Thorsvik's video
Thumbnail

On Top of Spaghetti: 3D Printed Cigar Box Guitar

26 minutes ago
Mick Tickner commented on Sammy Lloyd's video
Thumbnail

Eve of Destruction

"Is there any chance I can get to hear/see this please. I have been trying to do this on my 3 string…"
55 minutes ago
Glenn Kaiser posted a photo
Thumbnail

MAY 2024 Take Down Diddley

LOVE the sound, especially w. the smooth part of the bolt! Surprised and blessed! Going into a…
2 hours ago
0 Comments
BrianQ. left a comment for Mark Smith
2 hours ago
BrianQ. left a comment for Mick Tickner
2 hours ago

CigarBoxGuitar.com Knowledgebase Articles

Add a Panel-Mount Gain to a C. B. Gitty Amp Board

Cigar Box Guitar Building Tip: Neck Reinforcement with Humbuckers

A Step-by-Step Guide On How To Make a Straight Headstock

Cigar Box Ukulele Kit Assembly Guide

Advanced Cigar Box Guitar Building guide by Joshua Gayou

“Open A” AEA Tuning on your Cigar Box Guitar: 4 Methods, with String Sizes & Sound Clips

“Open E” EBE Tuning on your Cigar Box Guitar: 4 Methods, with String Sizes & Sound Clips

“Open D” DAD Tuning on your Cigar Box Guitar: 4 Methods, with String Sizes & Sound Clips

“Open G” GDG Tuning on your Cigar Box Guitar: 4 Methods, with String Sizes & Sound Clips

Diatonic (Dulcimer-Style) Fretting – What it is, How and Why to Use It

Events

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->