Replies to This Discussion

Permalink Reply by Ron "Oily" Sprague on October 15, 2013 at 11:59pm

Reeds,

Bairfoot cajun has done them. Termoking and Converted Stratslinger have cake pan reso pics. The inner mold works just like a Lowe cone: biscuit on top of the center post. You'll have to create a well deep enough, and attach that rolled top somehow; in some of the build pics I looked at, they've screwed on a drain cover to hold it down.

• ▶ Reply

Permalink Reply by Reeds Taylor on October 16, 2013 at 12:06am

Very interesting Ron....thanks for the heads up.

• ▶ Reply

Permalink Reply by Ron "Oily" Sprague on October 16, 2013 at 12:07am

No worries. I used the Search. ;-)

• ▶ Reply

Permalink Reply by Ron "Oily" Sprague on October 16, 2013 at 12:15am

Here ya go: pics of bc's Vengeance build:

http://www.cigarboxnation.com/photo/vengeance-build/next?context=user

You can see that the rolled edge is merely supported by the box top, and held down with string pressure on the bridge / cone. PM Brian, and he'll be happy to share build details.

• ▶ Reply

Permalink Reply by jawbone on October 16, 2013 at 1:46am

Those are some nice builds but another thing I noticed - There was another "jawbone", he hasn't been on for a few years - what did you guys do to him????  ☺

• ▶ Reply

Permalink Reply by Reeds Taylor on October 16, 2013 at 9:46am

Thanks Ron, I had thought Brian was already a friend. I had to request his frienship, and wait for acceptence.....anyways thank you again for your help sir, much appreciated.

• ▶ Reply

Permalink Reply by The Phrygian Kid on October 16, 2013 at 1:05pm

Brian is THE RESO PIMP, he's tried just about every kinda cone you can imagine

• ▶ Reply

Permalink Reply by Jim Woods on October 18, 2013 at 3:32am

Reeds, I will be watching the discussion as I have an identical pan. Has great resonance, but don't want to have a 10" deep git.

• ▶ Reply

Permalink Reply by Uncle John on October 18, 2013 at 3:45am

J.P. Swenson has done some cool stuff like this.  Maddog has used pan lids.    

What Ron had say makes sense.   Reeds, it looks too deep for me, but I am not real imaginitive.  

• ▶ Reply

Permalink Reply by Reeds Taylor on October 18, 2013 at 5:37am

I'm thinking that if the pan just sets into a hole and held by the string pressure (worked good for my dog dish build). I'm also thinking if I use a cookie tin lid as a resonator cover,it may increase the volume overall.

What are your thoughts?

• ▶ Reply

Permalink Reply by Uncle John on October 18, 2013 at 6:28am

Reeds, I think that is likely to be a winner- pan and tin cover.  Might sound real good, but looks big enough to be bulky.

• ▶ Reply