Love the site and LOVE the sounds produced by the cbg's.  First time I heard them on here, it made my hair stand up!!!  I wanna do old school as much as possible, on my first build.  So, what about coat hanger wire for the frets?  Anyone have any experience with that??  Also, what is the standard clearance between strings and frets; both along the neck and down on the body of the guitar?  One more question and I'll back out; Is the fret scale measured from the bridge to the nut to accomplish the 24.5" measurement?  As you can probably tell, I'm not very musically inclined!!  Thanks in advance for any advice or replies.

 

 

Views: 109

Replies to This Discussion

Interesting idea using coat hanger wire...I wonder if it has strength enough to stay straight or will it bend? I say try it and see, you might be on to something...Good Luck...Mike

i just built my first 3 string cbg and used toothpicks for frets. didnt make any cuts on the fingerboard just glued them on. if you plan on playn slide you might want your strings a little higher than most regular guitars, other than that high or low string action is usually a personal preferance. from nut to bridge 24 3/4" is the standard for gibson and 25.5" is standard for most fenders. this will make a differance on fret spacing. my cbg is not perfect but sounds pretty good and is fun to play, wich is important if its not fun whats the point

 

Coat hanger wire has been done before, so it must work right.  Go for it and show us the results.

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Discussion Forum

Can a box be too shallow?

Started by Sean Murphy. Last reply by Raymond Grimmitt Dec 21, 2021. 3 Replies

Removing box labels

Started by Robert Dawkins. Last reply by Order99 Jul 6, 2020. 8 Replies

Build 2!

Started by Sean Murphy. Last reply by Sean Murphy Oct 28, 2018. 3 Replies

Best/"Easiest " Way to notch out CBG Neck......?????

Started by Brian M Nusser. Last reply by ChickenboneJohn Nov 14, 2017. 16 Replies

First build, not-great results

Started by Sean Murphy. Last reply by Slow Blues Dani & Ol' Grey Bear Nov 14, 2017. 3 Replies

Neck length

Started by Holly Hodson. Last reply by Thomas "Duck" Petry Nov 9, 2017. 4 Replies

"If you wand to get something done real bad . . ."

Started by Michael Zimmerle. Last reply by Richard Dean Oct 23, 2017. 2 Replies

First build and a broken string.

Started by Dan Mullen. Last reply by Richard Dean Oct 23, 2017. 8 Replies

What type of saw to use?

Started by Anne M. Fridley-Owen. Last reply by Anne M. Fridley-Owen Dec 4, 2016. 3 Replies

*()@%&$! Piezo

Started by Chance. Last reply by Chance Oct 24, 2016. 3 Replies

general

Started by tommy farrar. Last reply by tommy farrar Nov 28, 2015. 2 Replies

Tail - or where the strings are mounted

Started by evanmars. Last reply by Richey Kay Aug 25, 2015. 7 Replies

My fifth build

Started by James A OBrien Apr 7, 2015. 0 Replies

Cardboard Cigar Box

Started by Redbelly. Last reply by Thomas "Duck" Petry Jun 30, 2014. 3 Replies

Just Finished My First CBG. YAY!!!!!!!!!!!!!!!!! (The Sequel)

Started by L. W. Carlson. Last reply by Thomas "Duck" Petry Jun 27, 2014. 3 Replies

Scale Length

Started by Wagner Richter. Last reply by Wagner Richter May 7, 2014. 3 Replies

Connecting a Neck

Started by Thumper Apr 18, 2014. 0 Replies

Latest Activity

Bobthrubass commented on Bobthrubass's status
"I know I'm logged in but I got a new laptop and I can't log in cause I can't…"
2 hours ago
BrianQ. commented on Bobthrubass's status
"You seemed to be successfully logged in? But you need to notify the moderator, because he probably…"
2 hours ago
BrianQ. liked Uncle John's photo
2 hours ago
Doug Thorsvik commented on Uncle John's photo
Thumbnail

Chugger Review 2nd from left

"Glad to see you have added a Chugger to your cigar box instrument ensemble! Looks like a fine…"
3 hours ago
Uncle John posted a photo

Chugger Review 2nd from left

Got my Chugger done a while back. It is second from the left in the photo.It uses a 3D printer fret…
5 hours ago
Doug Thorsvik commented on Doug Thorsvik's video
Thumbnail

Shout with Joy to God: 2-String Chugger License Plate Cigar Box Guitar

"Thanks Uncle John! And, yes, I did put the psalm to music using my 6-string years ago (back in my…"
6 hours ago
Bobthrubass posted a status
"Sorry I haven"t been on here awhile. PLEASE let me Reset my PASSWORD!!!!!"
7 hours ago
Uncle John commented on Doug Thorsvik's video
Thumbnail

Shout with Joy to God: 2-String Chugger License Plate Cigar Box Guitar

"Very good.  Original song- did you put the psalm to music,  Doug?"
8 hours ago
Uncle John commented on Poorness Studios's video
8 hours ago
Uncle John commented on Dogleg Steve's video
Thumbnail

Fiddly Rag from the book Cigar Box Picking by Dogleg Steve

"Another very good one.  Thanks, Steve."
8 hours ago
Uncle John commented on Dogleg Steve's video
8 hours ago
Uncle John commented on Dogleg Steve's video
Thumbnail

My entry for C B Gitty's 4th International Cigar Box video playoffs 2023 Dogleg Steve St Martins Rag

"Good to see and hear you, Steve!  Sounding very fine.   A bright and happy song.…"
8 hours ago

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->