Replies to This Discussion

Permalink Reply by Bluesheart on October 21, 2009 at 4:23pm

Hey Ben, thanks for being here and for your great deal. Just ordered some fret wire.
Bruce

Permalink Reply by Ben "C. B. Gitty" Baker on October 22, 2009 at 12:59am

Thanks for the order Bruce, it will go out today.

Bluesheart said:

Hey Ben, thanks for being here and for your great deal. Just ordered some fret wire.
Bruce

Permalink Reply by Ben "C. B. Gitty" Baker on February 19, 2010 at 4:08am

Updated main discussion text to reflect all new products and store updates.

Permalink Reply by Ben "C. B. Gitty" Baker on March 5, 2010 at 2:41am

BULK 1LB FRET WIRE LOTS BACK IN STOCK
*********************************************************
Just a quick note to let you know that I have my one-pound bulk lots of the Medium/Higher nickel-silver fret wire (same as StewMac #152) back in stock. My price on this one is cheaper than you could get one pound from StewMac for, and this is a perfect size for CBGs. So if you are doing a lot of building, check this out! No better price out there that I know of, and fast shipping.

C. B. Gitty Crafter Supply (http://www.cbgitty.com) is the place to go for all of your fret wire and fretting guide needs.

Permalink Reply by Ben "C. B. Gitty" Baker on April 12, 2010 at 5:42am

Fret Bevel Files are now available! I am pricing these at $27.99 each with FREE SHIPPING ($34.99 international), so they are a good bit cheaper than StewMac's plastic version.
Browse on over to C. B. Gitty Crafter Supply today to check it out!

Permalink Reply by Dianne Woods on April 20, 2010 at 5:51am

Hey Gitty, I received my fret wire. Thanks.

Permalink Reply by Ben "C. B. Gitty" Baker on April 23, 2010 at 4:30am

After long wait and much ado, I now have 1/4" guitar jacks in stock! These are good solid, durable Neutrik jacks that will last a good long time. Perfect for electrifying your CBGs! I also now have 1/4" nickel tuner bushings in stock, as well as a larger 7.75" size of my bevel file. Things are busy at C. B. Gitty Crafter Supply! Stop by today to check out all of our products, and get ready to save some money!

Visit C. B. Gitty Crafter Supply

Permalink Reply by Ben "C. B. Gitty" Baker on June 1, 2010 at 6:38am

Hey folks, just wanted to post an update regarding the tuners: the latest I have heard from the factory is that the order is due to be completed tomorrow, June 2, with shipment to occur very soon thereafter. So I hope to have them in stock and available by the middle of this month. It has been quite a saga to get this tuner deal going but once I get them stocked I expect it to be much smoother. Thanks for your patience!