String spacing on the 2 x 4 lap steel

Hey I got a lap steel kit from CB Gitty and am about to drill the holes below the bridge for the string feed.

Has anyone here put them together using the plans that come with the kit?

If so, should the string feeds be a bit unevenly spaced as the directions show? It would have the two highest strings a bit closer to each other. I've never played a lap steel regularly so not sure what's normal.

The directions show this spacing between strings from low to high

3/8, 3/8, 1/2, 1/2, 1/4

I feel inclined to ignore it and space them evenly, but thought I'd get some feedback here first.

Views: 379

Replies to This Discussion

Permalink Reply by Steve Wilkinson on May 16, 2017 at 6:55pm

I know he said that he did that bit quickly so I'm guessing it's not too important. I was planning on drilling mine equally spaced so I'd be interested in everyone's opinion too.

Permalink Reply by Don Bear on May 16, 2017 at 7:51pm

Andy,

The instructions are incorrect (I pointed this out to Ben and the instructions are being revised) Measure 3/4" in from the edge, drill the first hole and then space the holes 3/8" apart on center.

Permalink Reply by Andy R on May 18, 2017 at 2:27am
Thanks for the replies. I will space them evenly and march forth. I did notice a few other typos in those instructions but it wasn't hard to understand the intention

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources

Discussion Forum

Gibson Scale Lap Steel Fret Template:Standard & Metric

Started by BrianQ.. Last reply by Southern Ray Jan 22, 2021. 1 Reply

Eliminating hum

Started by Andy R. Last reply by Andy R Jul 7, 2017. 5 Replies

Pickup for Lapsteel

Started by Lou "cubancigar2000". Last reply by Peter Hendley Jun 30, 2017. 4 Replies

String spacing on the 2 x 4 lap steel

Started by Andy R. Last reply by Andy R May 18, 2017. 3 Replies

Blog Posts

I'll be fashionable this summer =)

Posted by Vlad on March 31, 2024 at 11:48pm 0 Comments

Everyone can make CBG. And I did it =)

Posted by Vlad on March 6, 2024 at 2:32am 5 Comments

.✨. Cover Me ..♪♫•*¨*•. ~ the Delta Blues Outlaws

Posted by billy jones bluez on February 28, 2024 at 2:09pm 0 Comments

Q&A with Arkansas-based talented blues musician Billy Jones, one of the very best authentic modern artists

Posted by billy jones bluez on February 17, 2024 at 11:00pm 0 Comments

Big Power Bank for Small CBG =)

Posted by Vlad on February 11, 2024 at 1:06am 1 Comment

Latest Activity

Doug Thorsvik commented on Doug Thorsvik's video
Thumbnail

Don't Worry Be Happy: 3D Printed Cigar Box Guitar

"Wish I could too Uncle John!!!"
3 hours ago
Doug Thorsvik commented on Doug Thorsvik's video
Thumbnail

I Can Only Imagine: 2-String Chugger License Plate Cigar Box Guitar

"Thanks Uncle John! I’m always delighted when other Slingers choose it to play."
3 hours ago
J. D. Woods commented on J. D. Woods's photo
Thumbnail

Current Instrument Line-Up

"Hi Uncle John, Ha, ha!! So glad you asked, I wondered when somebody was gonna notice! I'll try…"
3 hours ago
A.D.EKER commented on AGP #'s photo
Thumbnail

AGP #530 - ''Pink Floyd''

"Colorfull Build  AGP # the last colorfull song they will  ever build ,the feud is going…"
9 hours ago
A.D.EKER commented on Poorness Studios's video
Thumbnail

Jose Cuervo | Shelly West cover on 4-string CBG

"its good to hear you are part of the "Old Content" did not get any of this ,but you…"
9 hours ago
A.D.EKER commented on A.D.EKER's video
Thumbnail

There i was Standing at the ..... BCB - A. D. Eker 2024

"Good morning UJ ,How are you ? hope you are fine! i did say "CrossRoads",Blues Rock its a…"
9 hours ago
Uncle John commented on J. D. Woods's photo
Thumbnail

Current Instrument Line-Up

"Here is a link to CBG 101.   https://www.youtube.com/watch?v=jy04bkM_JSc"
15 hours ago
Uncle John commented on J. D. Woods's photo
Thumbnail

Current Instrument Line-Up

"Nice line up.  Unusual pick guard on the big git that looks like a Martin.  What is that…"
15 hours ago
Uncle John commented on Ghostbuttons's photo
Thumbnail

Four projects

"Nice, nice trio."
15 hours ago
Uncle John commented on Crazed Fandango's photo
Thumbnail

Frethound 4 String

"Looks great.  That looks like one I could really like playing.  Four strings too. …"
15 hours ago
Uncle John commented on David Hopkins's photo
Thumbnail

Anti-Body Guitars 18,19 and 20

"Great theme, workmanship and guitars!"
15 hours ago
Uncle John commented on David Hopkins's photo
Thumbnail

Angel 2x Anti-Body #17

"Very, very nice.  I hope it got to a good home and that it will be enjoyed.."
15 hours ago

CigarBoxGuitar.com Knowledgebase Articles

Add a Panel-Mount Gain to a C. B. Gitty Amp Board

Cigar Box Guitar Building Tip: Neck Reinforcement with Humbuckers

A Step-by-Step Guide On How To Make a Straight Headstock

Cigar Box Ukulele Kit Assembly Guide

Advanced Cigar Box Guitar Building guide by Joshua Gayou

“Open A” AEA Tuning on your Cigar Box Guitar: 4 Methods, with String Sizes & Sound Clips

“Open E” EBE Tuning on your Cigar Box Guitar: 4 Methods, with String Sizes & Sound Clips

“Open D” DAD Tuning on your Cigar Box Guitar: 4 Methods, with String Sizes & Sound Clips

“Open G” GDG Tuning on your Cigar Box Guitar: 4 Methods, with String Sizes & Sound Clips

Diatonic (Dulcimer-Style) Fretting – What it is, How and Why to Use It

Events

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->