Replies to This Discussion

Permalink Reply by BrianQ. on December 11, 2018 at 11:08pm

Picture?

Permalink Reply by Arthur Payne on December 12, 2018 at 12:56am

Thanks Brian,  this is as good as I could get.   I fed the string under the adjustment piece and as you can see this blocks the height adjustment.

Attachments:

• string ball 2.jpg, 1.2 MB
• string ball.jpg, 1.3 MB

Permalink Reply by Blind Lemon Cello on December 12, 2018 at 3:06am

Arthur, hard to tell but it looks like the bridge is setup for strings to come from underneath.

I use this type of Fender setup where the string come from the back under the mount screw for each bridge piece. You could drill holes to make it work. See pic.

Permalink Reply by BrianQ. on December 12, 2018 at 6:46am

Yes, run the strings through those holes in the rear of the bridge, is the easiest. The best string angle is to run them through the bottom of the bridge, from underneath like a Strat or Tele? See how they come from underneath?

Permalink Reply by Arthur Payne on December 12, 2018 at 12:37pm

Thanks guys for the help.   All fixed and working fine now.   What a great resource this is !!

Regards

Art

Permalink Reply by BrianQ. on December 12, 2018 at 2:50pm

Success! :D