Replies to This Discussion

Permalink Reply by John Sawyer on November 12, 2015 at 7:48pm

You probably should put it on google drive, and post the link here...

Permalink Reply by Graham Wedepohl on November 12, 2015 at 7:54pm

Fret Board Calculator

OK there is the link for the Windows EXE file, you need all 3 files and just run it.

It will produce a CSV file for ease of printing,

Permalink Reply by Graham Wedepohl on November 12, 2015 at 10:56pm

New link should work better

Fret Calc

Permalink Reply by Robert L. Pendergast on November 13, 2015 at 4:20am

Very cool. I am attempting to learn Ruby just for such projects. (Is Python a better start point than Ruby; I know nothing?)

ALSO, no program for iMAC?

Bob, fortney

Permalink Reply by Graham Wedepohl on November 13, 2015 at 6:15am

I think it's better for learning. I'll attach the Python file so it will not matter which OS you use it should just run. One quick note it was created with Python 3.4 so it would be best to use that or higher.

Attachments:

• FretCalcV2.py, 2 KB

Permalink Reply by Robert L. Pendergast on November 13, 2015 at 11:39am

Thanks.

Permalink Reply by Graham Wedepohl on November 13, 2015 at 7:03pm

Did you copy all 3 files?

Permalink Reply by Graham Wedepohl on November 14, 2015 at 5:12am

hum, strange. I'm running Windows 10 but I wrote the program in Python. Did it say it was missing any files?

Permalink Reply by Graham Wedepohl on November 14, 2015 at 10:11am

should only need the python34.dll and _ctypes.pyd along with the EXE to run and they are in the zip file

If you just DL the FretcalcV2.py file then  you need to install Python3.4 to run it. I put that in there for Apple users

Permalink Reply by Graham Wedepohl on November 14, 2015 at 10:23am

OK there is an issue with the zip file, so don't use it :(

The .py file will work if you install Python.

Sorry all I'll have to fix it