Replies to This Discussion

Permalink Reply by Denis U on November 12, 2015 at 5:35am

T, I haven't got much to add to Wayfinder's reply apart from this perhaps obvious point about where to put the bridge.

If it's a Tele kinda thing like this. Then you need to make sure that the string spacing on the nut is the same as the spacing on the bridge. And, I've used a couple of these and placed the bridge so that the scale length was at half the adjustable range of the saddles. I have no idea whether that is technocally correct, but both guitars could be tuned and intonated OK.

Hope this helps

Permalink Reply by T-Gripped on November 14, 2015 at 1:44am

Permalink Reply by T-Gripped on November 14, 2015 at 1:44am

Here is the one I bought...

Permalink Reply by Mark Bliss on November 14, 2015 at 3:23am

I'd suggest the use of a hard wood block as well for good screw retention. Maple perhaps.

Permalink Reply by T-Gripped on November 14, 2015 at 10:17am

Thanks guys! Appreciate the good input!