I scored this one for free and am trying to figure out if it will be good for a CBG. It is lined with felt... will that dampen the tone? Should the lining be removed? If so, what is the easy way?

Dimensions are 7 11/16" x 6 1/8" x 3 1/16". Thick sides, and a funky jointed 3-piece thick top, but with a thin bottom [which I would make the soundboard.] I am concerned that the felt and the box size will work against a nice sound. Comments?? 

I like the 'Dirt Torpedo' name!

Views: 580

Replies to This Discussion

I have never built one with kind of box, but I would expect that the felt would greatly dampen the sound.

No Idea, but I have one of those boxes and I'm definitely going to build it. If you are worried about the felt it shouldn't be that hard to remove. Use a magnetic pickup and it shouldn't matter, nor would the thick top. The other possibility would be to build it as an amplifier. I also like the 'Dirt Torpedo' name.

On the size of the box. I have built a few CBGs from smaller boxes and have been pleasantly surprised at both the tone quality and volume that they have. Part of the fun is trying different approaches to the concept and seeing the results.

I would use a pickup, imbed a small amp with a Speaker in it, the box is heavy walled, make a good battery powered portable CGB. I would have to show off that "Dirt Torpedo" logo. That is cool.

I'm currently working with a silverware box. It was velvet lined. I used an oscillating multi tool to peel the velvet out, then switched to a coarse sanding head to take out the old glue. Based on simply tapping the top and bottom, it made a significant difference in sound. The cloth will dampen the sound, so if you want to see how loud it will go, I recommend taking the time to remove the liner. Mine is going to be a resonator and I wan't to be able to play acoustically.

The cloth lining with a humbucker might be a good combination though.

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Discussion Forum

Cutting deep boxes in half

Started by Justin Stanchfield. Last reply by Taffy Evans Mar 20. 9 Replies

Attention 1st time builders!

Started by BrianQ.. Last reply by MadGomer Feb 27. 2 Replies

Brickhouse CBG Wiring

Started by Ian Boyd. Last reply by Ian Boyd Dec 11, 2023. 1 Reply

Fretless fret markers

Started by Michael Myers. Last reply by Michael Myers Apr 20, 2023. 8 Replies

canjo building and tuning

Started by Brenda. Last reply by MadGomer Dec 3, 2022. 5 Replies

Minimum tools needed

Started by Wichita Sam. Last reply by Taffy Evans Nov 14, 2022. 21 Replies

High G problem

Started by Michael Myers. Last reply by Taffy Evans Nov 3, 2022. 4 Replies

Doubling the high string

Started by Robert Killen. Last reply by Paul Craig Oct 14, 2022. 23 Replies

Aluminum License Plate

Started by Larry Sobol. Last reply by Larry Sobol Oct 1, 2022. 6 Replies

C. B. Gifty three string fretless kits.

Started by jon neet. Last reply by Taffy Evans Aug 16, 2022. 6 Replies

Frettin' and stainin'

Started by Doug Laffin. Last reply by Order99 Aug 11, 2022. 4 Replies

Bolt on neck to a set neck body?

Started by Paul Craig. Last reply by Paul Craig Jul 17, 2022. 14 Replies

Locations

Started by Roy Smith. Last reply by the anonymous pick May 15, 2022. 2 Replies

Help please re Bento Box Uke "nut"

Started by Al Lobe. Last reply by BrianQ. May 10, 2022. 18 Replies

Clarification on pick ups

Started by Michael Myers. Last reply by Taffy Evans May 6, 2022. 5 Replies

Licence plate cbg

Started by Michael Myers. Last reply by Michael Myers May 2, 2022. 5 Replies

Builder's Tips

Started by Wichita Sam. Last reply by MadGomer Feb 23, 2022. 2 Replies

Getting there but needing advice/help please.

Started by Lionhound. Last reply by MadGomer Feb 18, 2022. 8 Replies

Tres Cubano Build

Started by Paul Craig. Last reply by Paul Craig Dec 9, 2021. 18 Replies

CB Gitty Country Roads Banjo kit

Started by Ken Hope. Last reply by Christopher G Daniels Nov 29, 2021. 4 Replies

Latest Activity

Doug Thorsvik commented on Doug Thorsvik's video
Thumbnail

On Top of Spaghetti: 3D Printed Cigar Box Guitar

"I did not know that Kale! It’s a new song to me. I guess I don’t get around. It is very…"
10 hours ago
Taffy Evans replied to Bill Andy's discussion Nut
"Hi Bill, I see your problem, a neck with no fingerboard, yuck. Anyway, you will have to cut a…"
13 hours ago
AGP # liked A.D.EKER's photo
15 hours ago
AGP # liked A.D.EKER's photo
15 hours ago
AGP # liked Poorness Studios's video
15 hours ago
AGP # commented on AGP #'s photo
Thumbnail

AGP #533 - ''Beware of Wife''

""Thanks 'UJ' & Doug, Needless To Say!, "She Is Not Amused" ;-D"
15 hours ago
BrianQ. replied to Bill Andy's discussion Copper Hardware
"There’s a company named Guyker that makes antique bronze tuners, they look like an old penny,…"
16 hours ago
Gary O'slide posted a video
16 hours ago
A.D.EKER commented on A.D.EKER's photo
Thumbnail

Decoration on the Spider & Frog

"Thanks Doug Glad you Do !"
16 hours ago
A.D.EKER commented on A.D.EKER's photo
Thumbnail

Decoration on the Spider & Frog

"Thanks UJ !  GG (high) D, G .  only i reversed the stings On top is not the G (low) but…"
16 hours ago
BrianQ. liked Poorness Studios's video
17 hours ago
BrianQ. liked Doug Thorsvik's video
17 hours ago

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->