Tags:
Hi Pam-
I use 0.056 music wire on some of my diddley bows, and as Wade says, you don't necessarily need tuning machines, just a couple of 16 penny nails driven well into the wood. Put the diddley bow on the floor, put the music wire beside one of the nails, and position yourself with your left hand on the long part of the wire to hold it down. Lean down to put your wieght on your hand and the wire, and with long-nosed pliers in your right hand, wrap the wire around the nail twice. It is easiest to do this if you are working with your torso right above the diddley bow with the nail pointing at you, rather than working from the side. You get a lot more leverage on the wire that way. After you have a little more than two wraps, insert the pliers under the long part of the wire, grab the short end of the wire with the tips of the pliers and pull it under the long part, and then fold the short end of the wire over the long part to lock it in place.
So, the wire has two wraps going UP the nail, and then the short end is pulled UNDER the long end and is folded over the long end to lock it in place.
Repeat this at the other nail. I would advise hammering a finishing nail next to the 16 penny nail and hammering down over the wire to prevent it from riding up the nail when you slip the bridge and nut under the wire.
You can try fishing line, but my feeling is that it would likely be much too flimsy to hold up to the kind of playing I do. However, you may find a different way of playing that would work well with this kind of string. For example, Lonnie Pitchford played a guitar-like diddley bow and his playing style featured multiple pull-offs (two or three fingers pulling off in rapid sequence) and hammer-ons, and this type of string would probably be well suited for that type of playing style.
Please let me know how it comes out--since you are following my instructions, I have a particular interest in making sure the instructions are clear, and that you are happy with your instrument!
Good luck and please let us know how it works out!
Best regards, Willie
Wow, thanks for the advice! I really enjoyed your site, and appreciate your personal reply. I have to say that I am just flat out scared of that .056 wire! It's a real beast to work with, so I'll try to enlist some help and follow your tips. And wear good eye protection!!
I've finished the lighter version w/the tuning machine and it sounds pretty good. I tried the fishing line and it didn't have much oomph - although when I shoved an Altoids tin next to the "bridge" it was an interesting effect. But not what I wanted, so I swapped the fishing line out with a guitar string (.032) and I like the sound a lot.
One String Willie said:Hi Pam-
I use 0.056 music wire on some of my diddley bows, and as Wade says, you don't necessarily need tuning machines, just a couple of 16 penny nails driven well into the wood. Put the diddley bow on the floor, put the music wire beside one of the nails, and position yourself with your left hand on the long part of the wire to hold it down. Lean down to put your wieght on your hand and the wire, and with long-nosed pliers in your right hand, wrap the wire around the nail twice. It is easiest to do this if you are working with your torso right above the diddley bow with the nail pointing at you, rather than working from the side. You get a lot more leverage on the wire that way. After you have a little more than two wraps, insert the pliers under the long part of the wire, grab the short end of the wire with the tips of the pliers and pull it under the long part, and then fold the short end of the wire over the long part to lock it in place.
So, the wire has two wraps going UP the nail, and then the short end is pulled UNDER the long end and is folded over the long end to lock it in place.
Repeat this at the other nail. I would advise hammering a finishing nail next to the 16 penny nail and hammering down over the wire to prevent it from riding up the nail when you slip the bridge and nut under the wire.
You can try fishing line, but my feeling is that it would likely be much too flimsy to hold up to the kind of playing I do. However, you may find a different way of playing that would work well with this kind of string. For example, Lonnie Pitchford played a guitar-like diddley bow and his playing style featured multiple pull-offs (two or three fingers pulling off in rapid sequence) and hammer-ons, and this type of string would probably be well suited for that type of playing style.
Please let me know how it comes out--since you are following my instructions, I have a particular interest in making sure the instructions are clear, and that you are happy with your instrument!
Good luck and please let us know how it works out!
Best regards, Willie
Started by BrianQ.. Last reply by Cliff Whitefoot Mar 30, 2022. 1 Reply 1 Like
Started by BrianQ.. Last reply by BrianQ. Mar 12, 2022. 2 Replies 0 Likes
Started by BrianQ.. Last reply by BrianQ. Nov 15, 2018. 1 Reply 1 Like
Started by Jeff Powers. Last reply by Jeff Powers Oct 5, 2017. 2 Replies 2 Likes
Started by Bob. Last reply by Bob Apr 30, 2017. 3 Replies 2 Likes
Started by Boris Timofeenko. Last reply by Dano Schultz Apr 23, 2017. 2 Replies 6 Likes
Started by Andrew Cooper. Last reply by Andrew Cooper Mar 11, 2017. 2 Replies 0 Likes
Started by James Conder. Last reply by Gordon Cooper Dec 6, 2016. 1 Reply 1 Like
Posted by Vlad on March 31, 2024 at 11:48pm 0 Comments 1 Like
Posted by Vlad on March 6, 2024 at 2:32am 5 Comments 2 Likes
Posted by billy jones bluez on February 28, 2024 at 2:09pm 0 Comments 0 Likes
Posted by billy jones bluez on February 17, 2024 at 11:00pm 0 Comments 0 Likes
Posted by Vlad on February 11, 2024 at 1:06am 1 Comment 1 Like
May 11, 2024 from 11am to 8pm – Speakeasy Grill
0 Comments 0 LikesMay 30, 2024 from 6:30pm to 10pm – The Casual Pint of Huntsville
0 Comments 0 Likes© 2024 Created by Ben "C. B. Gitty" Baker. Powered by
Cigar Box Nation is presented by C. B. Gitty Crafter Supply, your one-stop-shop for Cigar Box Guitar parts and accessories!