Good article on pickup simulation from AMZ-FX, written by guitar electronics guru Jack Orman. Basically you can use any pickup, simple enough right? He even makes reference to CBG’S & 3 pole CBG pickups, give it a try someday? …
Hello everybody!Thought I'd drop these nuggets for anyone looking to wire (3) P90s into their guitars.First, the middle pickup must be reverse-wound, meaning you would wind the pickup clockwise. The neck and bridge pickup are winded in counterclockwise.Polarities of the magnets for the neck and…
Guys, after assembling yet another 3 stringer with one pick up, one volume pot, and one tone pot, something is amiss. Have never had this issue before. Static noise is heard when the guitar is plugged in, but there is no volume coming from the amp. There is a humming and if I touch the strings,…
Hi,The best sites I have found for easy to follow wiring diagrams are the Seymour Duncan sitehttp://www.seymourduncan.com/support/wiring-diagrams/and the Artec sound pdf that can be found here…
Already in the middle of my build and was going to use a Piezo with a volume knob and jack combo, but just recently got one of Marty Tauber's Wickedbucker, Is there a way to incorporate the wickedbucker into the schematics? Maybe even use a power switch to switch between them? Does anyone happen…
Hey out there, any wiring diagrams on psycho knob install in a guitar with vol.and tone pots? Thanks in advance
I vaguely remember mention of this on some youtube video, somewhere, in order to provide a 4-pole pickup for a 4-stringer, but I can't find the video in question and may even be misremembering who it was (likely!).I remember it sounded good.Has anyone tried this? Does anyone have any…
It was suggested to me that one of my designs might benefit from a built in speaker, so I had a couple of questions about how to go about it.For starters, I was thinking about breaking apart and rehousing one of those mini amps you see on ebay, but I'm aware that practically speaking, this may be…
Hi,I've just wired up my first guitar following wiring diagrams on the net. Mini humbucker, tone and volume pots and jack.Plugged it in and it all works well except the two pots crackle when I turn the knob. It's O.K. when I'm playing but while I'm adjusting tone or volume it crackles. I can…
Want to plug that thing in? Here's a place to share ideas about pickups (Both magnetic and piezo) and wiring in volume and tone control, the best options in output jacks, and more!
Remember that C. B. Gitty Crafter Supply is the one-stop shop for all of your CBG Electronics needs!