hi all, i am new to building cbg's, heck even to playing guitar all together. here in netherlands its kinda hard to find boxes so planning on making my own from scratch. found tons of info on here and i am confident enough to start the build.

i do have a nice box though but no lid. what i also do have is aluminum sheet varying from 0.8mm to 5mm thickness. now how good/bad would that sound if i used alu for the soundboard in same manner as a wooden lid is used?

if the aluminum is bad idea, i will just have to laminate a lid from veneer sheets, or is that bad idea too?


Pascal

Views: 246

Replies to This Discussion

not sure about the metal, I have heard of people making instruments from old lunch boxes. The best sound theoretically should come from a thin piece of wood. I think thats why many new builders come out ok even though their skills haven't been honed...Marcus. The best part is "no rules"

You will never know unless you build it. I would make the cbg so you could swap the aluminum lid with the laminated wood and see which you like better. Laminating the top from veneer will be fine, Many acoustic guitars use laminated tops. 

The aluminum will give you a more metallic sound and the wood would be much warmer. I think that by using both materials you would end up with a great guitar either way. Make sure that the aluminum is not too thin as the wight of the bridge/strings could buckle it.

I have made my own boxes as well and I have just used 3 ply for the lid and back and I have also used a license plate...both sounded great so go and have some fun.

think i will make both than. cant hurt trying it out.

Pascal

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Discussion Forum

Cutting deep boxes in half

Started by Justin Stanchfield. Last reply by Taffy Evans Mar 20. 9 Replies

Attention 1st time builders!

Started by BrianQ.. Last reply by MadGomer Feb 27. 2 Replies

Brickhouse CBG Wiring

Started by Ian Boyd. Last reply by Ian Boyd Dec 11, 2023. 1 Reply

Fretless fret markers

Started by Michael Myers. Last reply by Michael Myers Apr 20, 2023. 8 Replies

canjo building and tuning

Started by Brenda. Last reply by MadGomer Dec 3, 2022. 5 Replies

Minimum tools needed

Started by Wichita Sam. Last reply by Taffy Evans Nov 14, 2022. 21 Replies

High G problem

Started by Michael Myers. Last reply by Taffy Evans Nov 3, 2022. 4 Replies

Doubling the high string

Started by Robert Killen. Last reply by Paul Craig Oct 14, 2022. 23 Replies

Aluminum License Plate

Started by Larry Sobol. Last reply by Larry Sobol Oct 1, 2022. 6 Replies

C. B. Gifty three string fretless kits.

Started by jon neet. Last reply by Taffy Evans Aug 16, 2022. 6 Replies

Frettin' and stainin'

Started by Doug Laffin. Last reply by Order99 Aug 11, 2022. 4 Replies

Bolt on neck to a set neck body?

Started by Paul Craig. Last reply by Paul Craig Jul 17, 2022. 14 Replies

Locations

Started by Roy Smith. Last reply by the anonymous pick May 15, 2022. 2 Replies

Help please re Bento Box Uke "nut"

Started by Al Lobe. Last reply by BrianQ. May 10, 2022. 18 Replies

Clarification on pick ups

Started by Michael Myers. Last reply by Taffy Evans May 6, 2022. 5 Replies

Licence plate cbg

Started by Michael Myers. Last reply by Michael Myers May 2, 2022. 5 Replies

Builder's Tips

Started by Wichita Sam. Last reply by MadGomer Feb 23, 2022. 2 Replies

Getting there but needing advice/help please.

Started by Lionhound. Last reply by MadGomer Feb 18, 2022. 8 Replies

Tres Cubano Build

Started by Paul Craig. Last reply by Paul Craig Dec 9, 2021. 18 Replies

CB Gitty Country Roads Banjo kit

Started by Ken Hope. Last reply by Christopher G Daniels Nov 29, 2021. 4 Replies

Latest Activity

Doug Thorsvik posted a video

California Dreaming: 3D Printed Cigar Box Guitar

Cigar Box Guitar Slingers - Spokane, 201st Zoom Mtg 05/06/24. Only 1-finger chords, free songbooks here: https://www.cbgslinger.com/download CBG Songbook.pdf...
2 hours ago
Uncle John commented on Ghostbuttons's photo
Thumbnail

2 night project

"Very nice.  A clean and handsome fretless."
3 hours ago
Uncle John commented on Wanhavihtahousu's photo
Thumbnail

IMG_5132

"Those look great!"
3 hours ago
Uncle John commented on Wanhavihtahousu's photo
Thumbnail

IMG_5132

"Cool!"
3 hours ago
Sam Tringali is now a member of Cigar Box Nation
3 hours ago
A.D.EKER commented on AGP #'s photo
Thumbnail

AGP #533 - ''Beware of Wife''

"Thats a Beauty Alan whit the found riverwood and the Sign! i can hear it allready tearing it up!"
4 hours ago
Korrigan replied to Bill Andy's discussion Copper Hardware
"Did you click my link?  I'm seeing  lot of options."
5 hours ago
Mick Tickner commented on Mick Tickner's photo
Thumbnail

cbg2.4

"Ah so it's called a wing, thanks for that Doug.  And a bit ratty is exactly the look I…"
5 hours ago
Taffy Evans replied to Bill Andy's discussion Copper Hardware
"Hi, there is copper based paint available, and it actually creates a patina over time. I have not…"
8 hours ago
Wanhavihtahousu posted photos
9 hours ago
Ghostbuttons posted a photo

2 night project

Lots going on here. 22 inch scale, GDg. It’s made out of scrap. The neck is a bit of oak finish…
12 hours ago
BrianQ. replied to Bill Andy's discussion Copper Hardware
"Oh, yea , I forgot they have an economy line made overseas? Lace in the US did a limited edition…"
16 hours ago

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->