Initially my question was 250KOhm or 500KOhm but I found the info pretty easy.  Rather than a specific question here I'm hoping for some fill in the blanks type of discussion, since I am missing a lot of information and not just some single point.

My current build is a 4 stringer using a single humbucker and a fender style bridge.  I've noticed a banjo like quality on my previous builds and I'm thinking that I will use a 250KOhm volume pot for a warmer sound.

I've notice some comment that tone controls are underwhelming or a waste of effort on a cbg or where there isn't a preamp.  Is that a general concensus?

 I have read that the tone pot needs a capacitor.  Is that ony if you are using an audio taper pot for the tone? Gitty sells a 10KOhm linear taper pot for a tone control but doesn't sell capacitors, so is there an implication there that a capacitor isn't needed on this kind of pot?  And the low number 10KOhm linear taper vs 250 or 500 on the audio taper would still indicate that more highs would be bled off to ground?

I'm wanting to err in favor of warm and also don't want to short change this instrument if a tone pot is a plus and not just another knob.

Views: 414

Replies to This Discussion

Hi Carlotte,

 

The best overview of pots I have found is on the right hand side here http://www.axesrus.com/axeElectronicsPots.htm

I hope it is as good when they cover tone pots.

To convert a pot to a tone pot you just add a capacitor - different caps give different amounts of treble bleed to earth through the pot again a good overview is here (it also covers pots but I find the previous link the most informative) http://www.guitarelectronics.com/category/wiring_resources_guitar_w...

Usually I keep the tone pot value the same as the the one for volume so don't know what using a 10Kohm tone would do. Regarding getting the best out of a piezo I answered another thread with some info on this here

http://www.cigarboxnation.com/group/class101/forum/topics/another-p...

 

Regards,

David

Excellent! Thank you so much!  I got a lot out of your links and have enough information to choose my capacitors!  I think I can proceed now.

Excellent links and explaination, David.  Thank you.

I found two interesting things while researching more info on pots that may be of interest to someone. 

http://www.geofex.com/Article_Folders/potsecrets/potscret.htm

and

http://www.seymourduncan.com/forum/showthread.php?t=164476

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Discussion Forum

Swamp Lion Circuit- 3 P90s!

Started by ILL GREEN. Last reply by David Bowes Jul 31, 2022. 2 Replies

No Volume

Started by Steve Bookout. Last reply by BrianQ. Jun 15, 2021. 15 Replies

External Power Adapter- How To

Started by BrianQ.. Last reply by BrianQ. Jun 23, 2020. 3 Replies

Wiring diagrams

Started by David L.. Last reply by Ray Stanis Mar 24, 2020. 10 Replies

Wickedbucker + Piezo +Volume Jack

Started by Adam Jellison. Last reply by Paul Craig Feb 28, 2020. 9 Replies

Psycho knob install

Started by bizzaro guitaro. Last reply by Paul Craig Jan 31, 2020. 16 Replies

Splitting P-Bass pickups?

Started by John Mark Perchalski. Last reply by Paul Craig Jan 30, 2020. 3 Replies

Output method

Started by Holly Hodson. Last reply by KOOL DOG HOOCH Sep 22, 2019. 5 Replies

Creackle from Volume and Tone pots

Started by Arthur Payne. Last reply by KOOL DOG HOOCH Sep 21, 2019. 4 Replies

Dealing with hum...

Started by James Pobog. Last reply by KOOL DOG HOOCH Sep 21, 2019. 6 Replies

Copper foil tape as shield.

Started by Arthur Payne. Last reply by Arthur Payne May 2, 2019. 5 Replies

Why have a switch?

Started by Arthur Payne. Last reply by ILL GREEN Apr 12, 2019. 3 Replies

Problem with second-hand amp.

Started by Arthur Payne. Last reply by Arthur Payne Apr 1, 2019. 5 Replies

Added the CB Gitty “Psycho Knob”

Started by Tim Pannabecker. Last reply by Paul Craig Mar 8, 2019. 16 Replies

Lipstick pickup and Telecaster neck pickup. What goes where?

Started by Slow Blues Dani & Ol' Grey Bear. Last reply by Slow Blues Dani & Ol' Grey Bear Mar 1, 2019. 12 Replies

Wiring CB Gitty Black Ice Single Coil

Started by ILL GREEN. Last reply by ILL GREEN Jan 9, 2019. 5 Replies

Minimal effect from volume or tone pot

Started by Arthur Payne. Last reply by Paul Craig Dec 21, 2018. 9 Replies

Problem posting discussion

Started by Arthur Payne. Last reply by Paul Craig Dec 17, 2018. 2 Replies

Vol, tone, 3 way toggle and 2 single coils?

Started by Slow Blues Dani & Ol' Grey Bear. Last reply by Paul Craig Nov 24, 2018. 20 Replies

Latest Activity

BrianQ. left a comment for Sam Tringali
1 hour ago
BrianQ. liked Doug Thorsvik's video
1 hour ago
Southern Ray replied to Bill Andy's discussion Copper Hardware
"Taffy makes good points. I have no experience either with the paint, but I have a bunch of 50+ year…"
1 hour ago
Doug Thorsvik posted a video

California Dreaming: 3D Printed Cigar Box Guitar

Cigar Box Guitar Slingers - Spokane, 201st Zoom Mtg 05/06/24. Only 1-finger chords, free songbooks here: https://www.cbgslinger.com/download CBG Songbook.pdf...
4 hours ago
Uncle John commented on Ghostbuttons's photo
Thumbnail

2 night project

"Very nice.  A clean and handsome fretless."
4 hours ago
Uncle John commented on Wanhavihtahousu's photo
Thumbnail

IMG_5132

"Those look great!"
4 hours ago
Uncle John commented on Wanhavihtahousu's photo
Thumbnail

IMG_5132

"Cool!"
4 hours ago
Sam Tringali is now a member of Cigar Box Nation
4 hours ago
A.D.EKER commented on AGP #'s photo
Thumbnail

AGP #533 - ''Beware of Wife''

"Thats a Beauty Alan whit the found riverwood and the Sign! i can hear it allready tearing it up!"
5 hours ago
Korrigan replied to Bill Andy's discussion Copper Hardware
"Did you click my link?  I'm seeing  lot of options."
6 hours ago
Mick Tickner commented on Mick Tickner's photo
Thumbnail

cbg2.4

"Ah so it's called a wing, thanks for that Doug.  And a bit ratty is exactly the look I…"
7 hours ago
Taffy Evans replied to Bill Andy's discussion Copper Hardware
"Hi, there is copper based paint available, and it actually creates a patina over time. I have not…"
10 hours ago

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->