Comment

Comment by Thomas "Duck" Petry on January 27, 2013 at 10:40am

You_can_always_just_get_one_of_these_to_measure_with._Please_excuse_the_underlines_the_space-bar_on_my_keyboard_just_quit_working!

http://www.lowes.com/pd_317494-77923-KBSL21425_0__?productId=3366976

Comment by Bruce Trappes on January 27, 2013 at 10:25am

Go to the StewMac site. It gives you a choice of the measurements in either inches or millimeters.....no need to try and convert yourself :-)

Comment by Corbie on January 27, 2013 at 10:25am

Don't fear the small increments, anything 1/32 or smaller is a smear of the pencil line and I still can't cut the line.  Corbie

Comment by BrianQ. on January 27, 2013 at 10:22am

Thanx I'll keep that in mind, and where's da best place to get a measurement

device that measures milimeters on a larger scale? Way back  they

tried to make americans learn metrics, and I was one dat resisted,Lol :))

I'm still learning them

Comment by Thomas "Duck" Petry on January 27, 2013 at 10:19am

Comment by Bruce Trappes on January 27, 2013 at 9:39am

Easiest way to measure those smaller increments, is to convert to millimeters.....much easier.

Comment by BrianQ. on January 27, 2013 at 8:22am

So if i take out some of the fret positions, is that how you end up with those

smaller fret positions down the fretboard? I have been using Wfret for quite some time for my cbg's n diddleys. thanx 2 all who replied

Comment by BrianQ. on January 27, 2013 at 8:11am

I'm aware of that calculator, only thing is that i'm not that proficient on a ruler

to that precise of a measurment. you tell me 1/4 or 9/16 i'm good, but when

you tell me 1.235" or 2.598" i'm lost???

Comment by C Cook on January 27, 2013 at 7:28am

Heer is a simple clip I just put together out of a piece of banding material about 1.25" wide by 4" or so long. Along with a picture of it installed on on of my latest builds. Pretty simple & self explanatory. Canjo stick is of Hard maple fret board of Cherry with one of Gittys Uke rod piezos under can. Electronis behind brass plate.

Comment by C Cook on January 27, 2013 at 6:20am

Its nice to see that someone else actually built one after seeing a picture of one of my builds. Keep up the good work Battman. You can have a lot of fun building these and refining them to your specs. Depending how you want to hold it you can put a strap on one or a simple belt hook on the bottom so you can hook it to your belt and not have to hold the can end. Just a simple piece of light weight meatl bent in a u shape and atached to the bottom of the stick with a screw so it can rotate so it can be played either right or left handed. Ill try to get a picture posted of one in near future.

• ‹ Previous
• 1
• …
• 15
• 16
• 17
• 18
• 19
• …
• 31
• Next ›
• Page