Tags:
Well hello there Diane
my method of doing taperd necks is to start off with a paralell neck > draw a centre line all way down the neck > mark out the angle on each side > i use a spoke shave > Block plane to remove as much waste as possible > finish off with a length of flat timber with some sandpaper stuck to it with double sided tape
this is my method of choice i'm sure there are many other ways of doing it but i would not use a band saw or table saw but thats just my opinion
Enjoy
juju.
Thanks, Richard! I think I'll work your method for the fiddle (s) on the bench. I have a plan with a much more extreme angle for the head, but maybe that is unnecessary and I can get away with less angle and have it on in one piece.
Off to Woodworld!
I probably am the only builder that uses tree limbs as necks. The biggest reason I started making instrument necks this way, is the peghead has a natural angle from the growth of the limb. I start by taking an electric chainsaw and cutting out a rough shape. The top of the limb is cut as flat and as straight as I can get it by eye, then the peghead and then underneath. After the rough cutting I take to my 36" delta belt sander start doing the contours and flatting the fretboard part[top]. After the basic shape is obtain, I use a spoke shave to give it a round profile on the belly. One more time on the belt sander and lots of hand sanding. The result is an all natural neck, with a strength that will "never break" from string tension.
Started by Habanera Hal. Last reply by Rich Butters Nov 6, 2019. 24 Replies 2 Likes
Started by Jeff Box. Last reply by Thomas Case Sep 4, 2019. 3 Replies 3 Likes
Started by Jeff Box. Last reply by Jeff Box Sep 9, 2017. 5 Replies 0 Likes
Started by Fomhorach. Last reply by Mike Jun 17, 2017. 4 Replies 0 Likes
Started by John Hopper. Last reply by Moritz Voegeli Feb 23, 2017. 1 Reply 0 Likes
Started by Fomhorach. Last reply by Fomhorach Jun 16, 2016. 7 Replies 0 Likes
Started by Darren Addy. Last reply by Ron "Oily" Sprague Jun 14, 2016. 7 Replies 1 Like
Started by Habanera Hal. Last reply by Fomhorach May 4, 2016. 12 Replies 2 Likes
Started by Mario Poggio. Last reply by Philip Hale May 4, 2016. 9 Replies 1 Like
Started by Chuck Dubman. Last reply by G.S. Monroe Dec 21, 2015. 17 Replies 0 Likes
Started by Brian Lemin. Last reply by Monterey Mar 20, 2015. 8 Replies 0 Likes
Started by Scott W. Last reply by Scott W Jul 17, 2014. 9 Replies 2 Likes
Started by Lee Martin. Last reply by Wichita Sam Apr 3, 2014. 4 Replies 0 Likes
Started by Tim Mac. Last reply by Better Trees Jan 15, 2014. 3 Replies 0 Likes
Started by Keith Weser. Last reply by Mario Poggio Nov 29, 2013. 9 Replies 0 Likes
Started by Jillian Holladay. Last reply by Jillian Holladay Jul 23, 2013. 12 Replies 2 Likes
Started by Wayne Bigler. Last reply by Wayne Bigler Jul 12, 2013. 5 Replies 0 Likes
Started by Roadkill a.k.a. John Maw. Last reply by Mark Bliss Jul 10, 2013. 163 Replies 1 Like
Started by MichaelS Country Boy Guitars. Last reply by StarrCBGs(Donovan) Jul 10, 2013. 19 Replies 0 Likes
Started by Sam Fontenot. Last reply by StarrCBGs(Donovan) Jul 10, 2013. 17 Replies 0 Likes
Posted by Vlad on March 31, 2024 at 11:48pm 0 Comments 1 Like
Posted by Vlad on March 6, 2024 at 2:32am 5 Comments 2 Likes
Posted by billy jones bluez on February 28, 2024 at 2:09pm 0 Comments 0 Likes
Posted by billy jones bluez on February 17, 2024 at 11:00pm 0 Comments 0 Likes
Posted by Vlad on February 11, 2024 at 1:06am 1 Comment 1 Like
May 11, 2024 from 11am to 8pm – Speakeasy Grill
0 Comments 0 LikesMay 30, 2024 from 6:30pm to 10pm – The Casual Pint of Huntsville
0 Comments 0 Likes© 2024 Created by Ben "C. B. Gitty" Baker. Powered by
Cigar Box Nation is presented by C. B. Gitty Crafter Supply, your one-stop-shop for Cigar Box Guitar parts and accessories!