My second attempt, which ended up looking rather nice and sounds great!!! Made some goofs but not too drastic so I'm pleased with the result. I have 4 more pictures of this build in "my photos" if anyone wants to have a peek. Working on 2 more builds right now, (1) dulcimer and (1) guitar. The guitar should be a hoot because I don't know how to play it!
Tags:
Like the way you staggered the tuner holes!
Uh Oh!!!
Maybe I jumped the gun a little in stating this thing sounds great. Spent some time actually playing it (instead of playing with it!) and the second fret sound really, really tinny and across all four strings. The first, third and all the other frets play as they should.
My first thought is that the slot for the fret wire is too big and the fret is sloppy, but there is no wiggle in it. Will remove the fret, tighten up the slot and try it again.
Before I do that though, is there something else I should be looking at to cause just that one spot to sound bad?
Well, it might be a skootch too low, and the strings are just touching the next fret. If you have a short piece of perfectly flat metal or plastic, you can place it over just three frets at a time. If it rocks at all, the middle one is high. If you can see daylight on the middle fret of the three, he's the problem, and the others might need to be lowered a bit to accommodate him. But I bet a bit of leveling will do the trick.
I checked that first thing - wasn't the problem - was flat/level back to the 4th fret. Changed the rascally fret anyway but that didn't help either.
However by raising the bridge (1mm) the problem was resolved. So that fret was too low even tho it was inline with its neighbors.
Now to my befuddled feeble mind, why would the bridge mess up the #2 fret and not the 1st & 3rd..??..??
Anyway - Thanks for the input (:>
Diane in Chicago said:
Well, it might be a skootch too low, and the strings are just touching the next fret. If you have a short piece of perfectly flat metal or plastic, you can place it over just three frets at a time. If it rocks at all, the middle one is high. If you can see daylight on the middle fret of the three, he's the problem, and the others might need to be lowered a bit to accommodate him. But I bet a bit of leveling will do the trick.
Love your design George, Just starting my first build shortly and your design is what I am trying to accomplish. I am trying to get my head around the length of Neck. I want the fret board to extend onto the box like yours. What scales length did you use? I get confused as to how the last fret ends up at the box exactly. I also see you used 14 frets so am I correct to assume the half notes....learning as I go..lol.
Thanks
Hey Jeff -
Can't remember what the scale is on this one (and I don't have it here now to check), but I believe it's 25.5".
What I do when I layout my scale template is to have MANY more fret positions than I need and simply stop marking them when I get to the point on the fingerboard that I want. For instance, when I run the fret calculation program, I will indicate 21 (or 25 or 27) frets even if I know I won't use them.
So far, I have 2 completed dulcimers (need to get a pic of the 2nd and post it) and the other one has a 24" scale. I'm still a newbie at this craft, so I can only relate what has worked for me and there are scads of people hereabouts who are ready and able to help you get started right.
I am working on a 24" CB guitar right now and am building a CB amp to go with it. The guitar is harder for me since I don't know how to play it but hey! that's what it's all about.
One thing to remember when extending the fretboard over the sound box (like I did on this one) is keeping enough room between that last fret and the bridge so that you have space to strum. I didn't have any problem with this one because the Chateau box is l-o-n-g but my other build wouldn't work out the same because the cigar box is shorter.
The BIG thing to remember about cigar box builds - is that there are virtually no rules (beyond scale parameters). If you browse thru the pics & posts and look at what everybody is building, you'll notice that pretty much anything goes! If you want to do something or try for a special look, go for it. Like "they" keep saying, there are no rules!
And that is what I love about doing this!
Good luck and start building 'em.
Jeff Lamer said:
Love your design George, Just starting my first build shortly and your design is what I am trying to accomplish. I am trying to get my head around the length of Neck. I want the fret board to extend onto the box like yours. What scales length did you use? I get confused as to how the last fret ends up at the box exactly. I also see you used 14 frets so am I correct to assume the half notes....learning as I go..lol.
Thanks
Correction - Clarification!!!!
As a newbie builder, I presented a "tip" for laying out fret placement which can mess up your build.
I said that when I do my fret layout, I have the fret program add "extra" frets even if I know I won't be using them. Just discovered that this strategy can have some really undesirable consequences. By adding the extra frets to the template, it decreases the fret spacing and if you just quit marking that placement, the whole scale will be off. So the correct way to do the layout is figure out how many frets you want/need and THEN do the layout template (if you use a template as I do).
So to Jeff (and anybody else who might have tried this), I apologize for the misleading info. I discovered this error on the guitar I'm building when I checked the 12th fret spacing and it was off 1/2 inch!! No wonder it sounded strange! Now I have to completely re-do the neck.
George Durbin said:
Hey Jeff -
Can't remember what the scale is on this one (and I don't have it here now to check), but I believe it's 25.5".
What I do when I layout my scale template is to have MANY more fret positions than I need and simply stop marking them when I get to the point on the fingerboard that I want. For instance, when I run the fret calculation program, I will indicate 21 (or 25 or 27) frets even if I know I won't use them.
So far, I have 2 completed dulcimers (need to get a pic of the 2nd and post it) and the other one has a 24" scale. I'm still a newbie at this craft, so I can only relate what has worked for me and there are scads of people hereabouts who are ready and able to help you get started right.
I am working on a 24" CB guitar right now and am building a CB amp to go with it. The guitar is harder for me since I don't know how to play it but hey! that's what it's all about.
One thing to remember when extending the fretboard over the sound box (like I did on this one) is keeping enough room between that last fret and the bridge so that you have space to strum. I didn't have any problem with this one because the Chateau box is l-o-n-g but my other build wouldn't work out the same because the cigar box is shorter.
The BIG thing to remember about cigar box builds - is that there are virtually no rules (beyond scale parameters). If you browse thru the pics & posts and look at what everybody is building, you'll notice that pretty much anything goes! If you want to do something or try for a special look, go for it. Like "they" keep saying, there are no rules!
And that is what I love about doing this!
Good luck and start building 'em.
Jeff Lamer said:
Love your design George, Just starting my first build shortly and your design is what I am trying to accomplish. I am trying to get my head around the length of Neck. I want the fret board to extend onto the box like yours. What scales length did you use? I get confused as to how the last fret ends up at the box exactly. I also see you used 14 frets so am I correct to assume the half notes....learning as I go..lol.
Thanks
Wait! If including a larger number of frets in your fret calculator (while leaving the scale constant) changes the position of your 12th fret, there is something wrong with your fret calculator. It does not matter how many frets you include, the only thing that matters is the placement of however many you choose to utilize. The 12th, the 24th and even the 36th are where they are, no matter if you include them or not. For example a scale of 24", the 12 is at 12" and the 24th is at 18" and the 36th is at 21", even if they are only in your imagination.
I use this fret calculator that prints a template. I find it easier to get an accurate marking that way.
http://cigarboxguitars.com/fretfind/standard.php
George Durbin said:
Correction - Clarification!!!!
As a newbie builder, I presented a "tip" for laying out fret placement which can mess up your build.
I said that when I do my fret layout, I have the fret program add "extra" frets even if I know I won't be using them. Just discovered that this strategy can have some really undesirable consequences. By adding the extra frets to the template, it decreases the fret spacing and if you just quit marking that placement, the whole scale will be off. So the correct way to do the layout is figure out how many frets you want/need and THEN do the layout template (if you use a template as I do).
So to Jeff (and anybody else who might have tried this), I apologize for the misleading info. I discovered this error on the guitar I'm building when I checked the 12th fret spacing and it was off 1/2 inch!! No wonder it sounded strange! Now I have to completely re-do the neck.
Hi Diane,
That's what I thought, which is why I made that comment/suggestion and I use that same fret calculator (FretFind2D) that you posted the link to.
However, just yesterday I discovered that the guitar I'm working on sounded "off", so I checked the 12th fret from nut and bridge and it's off 1/2 inch. I used my template (26.5") with the extra frets worked in and since it was off, I figured that those extra frets messed up the spacing.
I'm going to experiment with that program to see what's up. I've made a dozen different templates to have on hand in the shop and now I'll have to double check each one,
I'm glad I'm not using exotic (expensive) wood for these builds (:>
Diane in Chicago said:
Wait! If including a larger number of frets in your fret calculator (while leaving the scale constant) changes the position of your 12th fret, there is something wrong with your fret calculator. It does not matter how many frets you include, the only thing that matters is the placement of however many you choose to utilize. The 12th, the 24th and even the 36th are where they are, no matter if you include them or not. For example a scale of 24", the 12 is at 12" and the 24th is at 18" and the 36th is at 21", even if they are only in your imagination.
I use this fret calculator that prints a template. I find it easier to get an accurate marking that way.
http://cigarboxguitars.com/fretfind/standard.php
George Durbin said:
Correction - Clarification!!!!
As a newbie builder, I presented a "tip" for laying out fret placement which can mess up your build.
I said that when I do my fret layout, I have the fret program add "extra" frets even if I know I won't be using them. Just discovered that this strategy can have some really undesirable consequences. By adding the extra frets to the template, it decreases the fret spacing and if you just quit marking that placement, the whole scale will be off. So the correct way to do the layout is figure out how many frets you want/need and THEN do the layout template (if you use a template as I do).
So to Jeff (and anybody else who might have tried this), I apologize for the misleading info. I discovered this error on the guitar I'm building when I checked the 12th fret spacing and it was off 1/2 inch!! No wonder it sounded strange! Now I have to completely re-do the neck.
Okay, now I have a dilemma......
Due to questions about 12th fret spacing being off on my current build, I ran my fret calculators again. The FretFind2D gave me the same template that I was using and checking that template revealed that the 12th fret is indeed not equidistant from nut and bridge.
Ran the same scale thru the WFret program and it printed out a template that is indeed 12th fret accurate.
I realize that this is "cigar box" and that there are no rules - if it sounds good, then rock it! - but I would think that intonation should be a close to "standard" as possible. Or am I over-thinking this?
Has anybody else run into this issue or have a problem with the FretFind calculator??
And, does anybody know who's site it is, so I can contact him/her/them with my dilemma..??
thanx,
George
Hi Diane,
That's what I thought, which is why I made that comment/suggestion and I use that same fret calculator (FretFind2D) that you posted the link to.
However, just yesterday I discovered that the guitar I'm working on sounded "off", so I checked the 12th fret from nut and bridge and it's off 1/2 inch. I used my template (26.5") with the extra frets worked in and since it was off, I figured that those extra frets messed up the spacing.
I'm going to experiment with that program to see what's up. I've made a dozen different templates to have on hand in the shop and now I'll have to double check each one,
I'm glad I'm not using exotic (expensive) wood for these builds (:>
Diane in Chicago said:
Wait! If including a larger number of frets in your fret calculator (while leaving the scale constant) changes the position of your 12th fret, there is something wrong with your fret calculator. It does not matter how many frets you include, the only thing that matters is the placement of however many you choose to utilize. The 12th, the 24th and even the 36th are where they are, no matter if you include them or not. For example a scale of 24", the 12 is at 12" and the 24th is at 18" and the 36th is at 21", even if they are only in your imagination.
I use this fret calculator that prints a template. I find it easier to get an accurate marking that way.
http://cigarboxguitars.com/fretfind/standard.php
George Durbin said:
Correction - Clarification!!!!
As a newbie builder, I presented a "tip" for laying out fret placement which can mess up your build.
I said that when I do my fret layout, I have the fret program add "extra" frets even if I know I won't be using them. Just discovered that this strategy can have some really undesirable consequences. By adding the extra frets to the template, it decreases the fret spacing and if you just quit marking that placement, the whole scale will be off. So the correct way to do the layout is figure out how many frets you want/need and THEN do the layout template (if you use a template as I do).
So to Jeff (and anybody else who might have tried this), I apologize for the misleading info. I discovered this error on the guitar I'm building when I checked the 12th fret spacing and it was off 1/2 inch!! No wonder it sounded strange! Now I have to completely re-do the neck.
Started by GARAGE HERMIT. Last reply by GARAGE HERMIT Mar 30, 2022. 2 Replies 0 Likes
Started by Richey Kay. Last reply by James Conder Jan 14, 2018. 11 Replies 0 Likes
Started by Slow Blues Dani & Ol' Grey Bear. Last reply by QGolden Sep 15, 2016. 17 Replies 0 Likes
Started by Dano Schultz. Last reply by Dano Schultz Sep 10, 2016. 5 Replies 1 Like
Started by Kirk Bolas. Last reply by Gordon Cooper Aug 2, 2016. 3 Replies 0 Likes
Started by Habanera Hal. Last reply by Greg Thompson Jul 7, 2016. 12 Replies 1 Like
Started by Greg Thompson. Last reply by Paul Craig Sep 7, 2015. 6 Replies 3 Likes
Started by Truth Instruments. Last reply by Truth Instruments Aug 30, 2015. 6 Replies 1 Like
Started by Bobby Fields. Last reply by Seth Tabberer Aug 21, 2015. 5 Replies 0 Likes
Started by Rand Moore. Last reply by QGolden May 15, 2015. 4 Replies 1 Like
Started by stav. Last reply by Ellwood T. Bear Apr 6, 2015. 3 Replies 0 Likes
Started by Bluesheart. Last reply by Bluesheart Apr 1, 2015. 10 Replies 0 Likes
Started by Diane in Chicago. Last reply by Brown Water Jerry (Rice) Nov 10, 2014. 21 Replies 0 Likes
Started by Rand Moore. Last reply by wormil Sep 4, 2014. 16 Replies 0 Likes
Started by Diane in Chicago. Last reply by Jesse Halter Jul 1, 2014. 57 Replies 6 Likes
Started by Bluesheart. Last reply by Bluesheart Nov 24, 2013. 9 Replies 1 Like
Started by Bad Wolf. Last reply by Battmann Aug 31, 2013. 6 Replies 3 Likes
Started by jeff burgoyne. Last reply by Scott aka Farmer Ted Jun 17, 2013. 1 Reply 0 Likes
Posted by Vlad on March 31, 2024 at 11:48pm 0 Comments 1 Like
Posted by Vlad on March 6, 2024 at 2:32am 5 Comments 2 Likes
Posted by billy jones bluez on February 28, 2024 at 2:09pm 0 Comments 0 Likes
Posted by billy jones bluez on February 17, 2024 at 11:00pm 0 Comments 0 Likes
Posted by Vlad on February 11, 2024 at 1:06am 1 Comment 1 Like
May 11, 2024 from 11am to 8pm – Speakeasy Grill
0 Comments 0 LikesMay 30, 2024 from 6:30pm to 10pm – The Casual Pint of Huntsville
0 Comments 0 Likes© 2024 Created by Ben "C. B. Gitty" Baker. Powered by
Cigar Box Nation is presented by C. B. Gitty Crafter Supply, your one-stop-shop for Cigar Box Guitar parts and accessories!