Replies to This Discussion

Permalink Reply by bairfoot cajun on March 30, 2009 at 12:23pm

cant wait to see what the fader has in store for us.

Permalink Reply by David Fultz on March 30, 2009 at 4:15pm

Here Is my entry for the nonwood challenge. "HIGH Voltage" built from Electical parts. The eyes and sound hole light up as well as the toggle that turns them on. Just did the best I could with what I found lying around. ROCK ON ! I'll try to have a short sound vid tomorrow.

Permalink Reply by THE FADER on March 31, 2009 at 9:41am

"THE WACKER"

This is my entry for the no wood challenge started by Bonehead. This is also the first musical anything, that I have ever built. Thanks Steve for the opportunity. I had a blast!!!

Permalink Reply by THE FADER on March 31, 2009 at 9:52am

"THE WACKER"

Shot of the body. It is an air filter housing off of a Wacker "jumping jack" dirt compactor. The bridge is a piece of bamboo and a black corian piece shaped like a "parking block". The strings are held by a pocket clip from a Stanley tape measure I found at work. The string tension lifts the top part of the clip up enough that it can be used as a tremelo by pushing down or pulling up...... completely unplanned but cool!!!

Permalink Reply by THE FADER on March 31, 2009 at 9:56am

"THE WACKER"

Carbonized bamboo flooring fret board.........20 frets on a 25 inch scale.

Permalink Reply by THE FADER on March 31, 2009 at 10:00am

"THE WACKER"

The corian headstock with a Wacker logo, Wilkinson imperial tuners and a black corian nut.

Permalink Reply by THE FADER on March 31, 2009 at 10:02am

"THE WACKER"

Back of the body is made from a 1/2 inch piece of corian.

Permalink Reply by THE FADER on March 31, 2009 at 10:04am

"THE WACKER"

Top side, shot

Permalink Reply by THE FADER on March 31, 2009 at 10:08am

"THE WACKER"

Back of the headstock / neck connection. Neck is made from 2, 3/4 inch EMT gorilla glued together and filled in with auto body filler.

Permalink Reply by THE FADER on March 31, 2009 at 10:11am

"THE WACKER"

Another shot, of that wicked angle!

Permalink Reply by THE FADER on March 31, 2009 at 10:14am

"THE WACKER"

I made the strap from some lumber banding I found at work. I painted it to match and riveted on some black leather.

Permalink Reply by THE FADER on March 31, 2009 at 10:19am

"THE WACKER"

The "GUTS"...........Thank you to all the guys on the chat for answering my endless questions ! Thanks again Steve and everyone for the opportunity and the friendship.

• ‹ Previous
• 1
• 2
• 3
• 4
• 5
• Next ›
• Page