Looking for ideas on simple but effective wall hangers. Post a pic and show us what you've come up with ☺

Views: 407

Replies to This Discussion

Nearly unlimited options on this one, I'm sure you'll get some interesting feedback. On one that I gave away I simply tied a loop of old baler twine on the headstock so he could hang it on a nail.

  

I don't remember where I got the pins from... something else that was going in the trash... deck screws with aquarium tubing or drip line tubing works good, too...  Easy Peasy...

Liking it, super simple and i could always make one about 5' long for future builds.

Excuse the decor - i'm in the process of redecorating.

2x4, Superglue, twine, tool storage hooks, screws, Imagination.


Came up with a simple solution. Rail made from scrappy piece of 2x1 pine and hooks from an old coat hanger. Short length of garden twine tied aroumd neck ( all i had to hand at the time)
Attachments:
Looks good a simple salutation to your problem .I up graded mine as soon as I got home off holidays .I'll sling you a pic in a bit .
Both look good gentlemen, carry on with the builds!
Here's my upgraded hanger
Attachments:

Very simple piece of pine board with hardwood dowel pegs - works very well and is in-keeping with the simplicity of the guitar

Bob, I like that and might steal your design. One thing to consider to give it an even simpler/cleaner look is to screw it to the wall through the peg holes, and then tap the dowels in after driving in the screws. Thanks for the photo!

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Discussion Forum

Cutting deep boxes in half

Started by Justin Stanchfield. Last reply by Taffy Evans Mar 20. 9 Replies

Attention 1st time builders!

Started by BrianQ.. Last reply by MadGomer Feb 27. 2 Replies

Brickhouse CBG Wiring

Started by Ian Boyd. Last reply by Ian Boyd Dec 11, 2023. 1 Reply

Fretless fret markers

Started by Michael Myers. Last reply by Michael Myers Apr 20, 2023. 8 Replies

canjo building and tuning

Started by Brenda. Last reply by MadGomer Dec 3, 2022. 5 Replies

Minimum tools needed

Started by Wichita Sam. Last reply by Taffy Evans Nov 14, 2022. 21 Replies

High G problem

Started by Michael Myers. Last reply by Taffy Evans Nov 3, 2022. 4 Replies

Doubling the high string

Started by Robert Killen. Last reply by Paul Craig Oct 14, 2022. 23 Replies

Aluminum License Plate

Started by Larry Sobol. Last reply by Larry Sobol Oct 1, 2022. 6 Replies

C. B. Gifty three string fretless kits.

Started by jon neet. Last reply by Taffy Evans Aug 16, 2022. 6 Replies

Frettin' and stainin'

Started by Doug Laffin. Last reply by Order99 Aug 11, 2022. 4 Replies

Bolt on neck to a set neck body?

Started by Paul Craig. Last reply by Paul Craig Jul 17, 2022. 14 Replies

Locations

Started by Roy Smith. Last reply by the anonymous pick May 15, 2022. 2 Replies

Help please re Bento Box Uke "nut"

Started by Al Lobe. Last reply by BrianQ. May 10, 2022. 18 Replies

Clarification on pick ups

Started by Michael Myers. Last reply by Taffy Evans May 6, 2022. 5 Replies

Licence plate cbg

Started by Michael Myers. Last reply by Michael Myers May 2, 2022. 5 Replies

Builder's Tips

Started by Wichita Sam. Last reply by MadGomer Feb 23, 2022. 2 Replies

Getting there but needing advice/help please.

Started by Lionhound. Last reply by MadGomer Feb 18, 2022. 8 Replies

Tres Cubano Build

Started by Paul Craig. Last reply by Paul Craig Dec 9, 2021. 18 Replies

CB Gitty Country Roads Banjo kit

Started by Ken Hope. Last reply by Christopher G Daniels Nov 29, 2021. 4 Replies

Latest Activity

BrianQ. liked Poorness Studios's video
20 minutes ago
BrianQ. liked Doug Thorsvik's video
22 minutes ago
BrianQ. liked Glenn Kaiser's photo
24 minutes ago
Carl Floyd replied to Bill Andy's discussion Copper Hardware
2 hours ago
Glenn Kaiser commented on Glenn Kaiser's photo
Thumbnail

MAY 2024 Take Down Diddley

"Thanks Doug, will do :) -Glenn"
3 hours ago
Doug Thorsvik commented on Poorness Studios's video
Thumbnail

Rainbow Stew (low budget cover on cigar box guitar) | Merle Haggard

"A new one for me Kale, and I like it! I always enjoy your CBG covers. Happy Sunday!"
4 hours ago
Doug Thorsvik commented on Glenn Kaiser's photo
Thumbnail

MAY 2024 Take Down Diddley

"Clean and simple! Ready for a little Jailhouse Rock. Go for it Glenn!"
4 hours ago
Doug Thorsvik commented on AGP #'s photo
Thumbnail

AGP #533 - ''Beware of Wife''

"This one is definitely an attention getter Alan! I’m not brave enough to build one like this.…"
4 hours ago
Doug Thorsvik commented on A.D.EKER's photo
Thumbnail

Decoration on the Spider & Frog

"I like it Andries! "
4 hours ago
Doug Thorsvik commented on Mick Tickner's photo
Thumbnail

cbg2.4

"Me too! It’s a challenge to nail everything right out of the gate, so tweak them when you…"
4 hours ago
Poorness Studios posted a video

Rainbow Stew (low budget cover on cigar box guitar) | Merle Haggard

Happy Sunday folks. I've wanted to cover this 1981 Merle Haggard tune for a while and I decided today is the day. Here's a stripped down cover with nothing b...
4 hours ago
Doug Thorsvik commented on Doug Thorsvik's video
Thumbnail

On Top of Spaghetti: 3D Printed Cigar Box Guitar

"Thanks and glad you enjoyed this one Alan! Another Slinger requested song and fun to do. I really…"
4 hours ago

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->