To date I have been using the standard 1 x 2 sticks of poplar from lowes for my necks. From what I have researched, Maple is probably a good choice for these since it is hard and is less likely to bow. And it seems like ebony and rosewood are great choices for fretboards.

This leads to 2 questions....

1. What neck materials do ya'll like to use and why?
2. If you play 90% slide (with very little fretting of notes) does the fingerboard wood have much of an impact on the sound, or at that point is it mostly a look thing?

Views: 179

Replies to This Discussion

i mainly use poplar or eed oak because thats whats readily available if i coild find maple or rose in my area i would go with either
Mahogany is my favorite tone wood by far for necks. It just seems to warm up the sound of guitars. I've had a hard time finding an inexpensive source, though. If you don't mind a softer wood, I really like the sound of pine.
Oak, mahogany, walnut, maple... no particular order but hard, strong, pretty and mix in a vertical laminate produces a great looking neck than can handle the load with ease...

I play slide and have even used cedar for a fingerboard, as you say for the looks... My fav is maple or mahogany for the looks...
Oh, most "Home Depots" carry maple as a stock item... don't expect fancy figured stuff, but straight, strong and pretty in a plain sorta way....

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Discussion Forum

Cutting deep boxes in half

Started by Justin Stanchfield. Last reply by Taffy Evans Mar 20. 9 Replies

Attention 1st time builders!

Started by BrianQ.. Last reply by MadGomer Feb 27. 2 Replies

Brickhouse CBG Wiring

Started by Ian Boyd. Last reply by Ian Boyd Dec 11, 2023. 1 Reply

Fretless fret markers

Started by Michael Myers. Last reply by Michael Myers Apr 20, 2023. 8 Replies

canjo building and tuning

Started by Brenda. Last reply by MadGomer Dec 3, 2022. 5 Replies

Minimum tools needed

Started by Wichita Sam. Last reply by Taffy Evans Nov 14, 2022. 21 Replies

High G problem

Started by Michael Myers. Last reply by Taffy Evans Nov 3, 2022. 4 Replies

Doubling the high string

Started by Robert Killen. Last reply by Paul Craig Oct 14, 2022. 23 Replies

Aluminum License Plate

Started by Larry Sobol. Last reply by Larry Sobol Oct 1, 2022. 6 Replies

C. B. Gifty three string fretless kits.

Started by jon neet. Last reply by Taffy Evans Aug 16, 2022. 6 Replies

Frettin' and stainin'

Started by Doug Laffin. Last reply by Order99 Aug 11, 2022. 4 Replies

Bolt on neck to a set neck body?

Started by Paul Craig. Last reply by Paul Craig Jul 17, 2022. 14 Replies

Locations

Started by Roy Smith. Last reply by the anonymous pick May 15, 2022. 2 Replies

Help please re Bento Box Uke "nut"

Started by Al Lobe. Last reply by BrianQ. May 10, 2022. 18 Replies

Clarification on pick ups

Started by Michael Myers. Last reply by Taffy Evans May 6, 2022. 5 Replies

Licence plate cbg

Started by Michael Myers. Last reply by Michael Myers May 2, 2022. 5 Replies

Builder's Tips

Started by Wichita Sam. Last reply by MadGomer Feb 23, 2022. 2 Replies

Getting there but needing advice/help please.

Started by Lionhound. Last reply by MadGomer Feb 18, 2022. 8 Replies

Tres Cubano Build

Started by Paul Craig. Last reply by Paul Craig Dec 9, 2021. 18 Replies

CB Gitty Country Roads Banjo kit

Started by Ken Hope. Last reply by Christopher G Daniels Nov 29, 2021. 4 Replies

Latest Activity

AGP # liked Mick Tickner's photo
18 minutes ago
AGP # liked Mick Tickner's photo
18 minutes ago
AGP # liked Mick Tickner's photo
18 minutes ago
AGP # liked Mick Tickner's photo
20 minutes ago
AGP # liked Mick Tickner's photo
21 minutes ago
AGP # liked Glenn Kaiser's photo
21 minutes ago
AGP # commented on Doug Thorsvik's video
Thumbnail

On Top of Spaghetti: 3D Printed Cigar Box Guitar

""LOL", had forgotten all about that "Littke Ditty" from days of Yore, as…"
23 minutes ago
AGP # liked Doug Thorsvik's video
25 minutes ago
Mick Tickner commented on Sammy Lloyd's video
Thumbnail

Eve of Destruction

"Is there any chance I can get to hear/see this please. I have been trying to do this on my 3 string…"
54 minutes ago
Glenn Kaiser posted a photo

MAY 2024 Take Down Diddley

LOVE the sound, especially w. the smooth part of the bolt! Surprised and blessed! Going into a…
2 hours ago
BrianQ. left a comment for Mark Smith
2 hours ago
BrianQ. left a comment for Mick Tickner
2 hours ago

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->