I skipped the beginner's forum and went straight for the Super Advanced because I am a pretty advanced mad scientist/tinkerer type.
Romeo is made from a Cedar Romeo & Juliet Medallas de Oro box.
I used the bottom as the sound board so I could have easy access to the electronics.
The bolt-on neck is made from an oak stake that I have used to hold up tomato plants for 10 years. (well dried!) The markings on the neck are just pencil marks for reference. I am still tweaking the bridge and nut positioning. In the end, Romeo will be fretless, with reference marks on the upper edge of the neck. It is intended to be played almost exclusively with slide. I use a glass bottle neck and a Joe Perry ceramic stubby slide.
The bridge is a piece of hardened steel rod sitting on a piece of hand carved oak.
Under the bridge is a Radio Shack piezo pickup sandwiched in electrical tape which takes the bite off of the microphonics without muddying the sound.
The obvious addition is the humbucker pickup. What isn't obvious, is that the potentiometer at the bottom right is actually a continuous blending pot enabling mixing the pickup blend. Since there is an impedence mis-match (not nearly as much as I had thought,) I have to adjust the master volume knob on the butt of the guitar control to keep the output level when changing the blend.
The sound holes were cut to mirror the shape of the hinge i used for the tail-piece and the ornament at the base of the neck.
I am still working out a ground loop the recently showed up and figuring out how I will finish the neck and top.
I didn't assume that my first effort would be much more than a proof of concept, but It sounds amazing. It really helped that I made a couple of Diddley bows with various pickups and positions prior to building this.
James Haney
Tags:
Wow, for a first build I have to say that looks pretty darn amazing! (Actually it would look just as amazing if it was your 100th, 1,000th, whatever - it just flat out looks amazing.)
I really like the bridge and the hardware you put on the box. I've used grommets in my soundholes, partly for decoration but also to cover up "ugly" uneven holes, but I haven't considered adding any other hardware anywhere. Seeing your pictures makes me want to start adding more though.
Fantastic, sweet looking build! Very one-of-a-kind.
Wow,
Thanks for the overflowing praise.
I do have a lot of experience building artwork projects which helped, but in a lot of ways I got lucky. Not so much in the looks, but in the sound.
The tone on this guitar is really nice. Everyone who plays it is amazed.
I did a bunch of research in retrospect to prepare for making my next build and here is what I have determined that make this guitar really sing.
1. The box is made of really nice cedar and closes very solidly, making for a nice sound chamber.
2. I used the bottom of the box (the thinnest part) for the top, which, according to a lot of sources, makes for a better sounding CBG. Originally, I did this to make it easier to get at the electronics.
3. The piece of wood I had for the neck was too short to do a traditional, thru-the-box neck. So, I added a "heel" or "neck brace" to support the neck. This also has an interesting side effect. The box is flexible enough that I can flex the guitar against my body to get pitch bends!
4. The box is 3 inches deep. I have listened to a lot of CBGs since making mine and I invariably prefer the sound of the larger, deeper boxes. From this, I have determined that I will only use boxes of at least 2 .5 inches deep for my next guitars.
So, what do I have planned next?
I attached a picture of a cigar box I just bought on eBay this week. (11 3/4" W X 8 1/4" L X 2 3/4" D). I'm going to make a 4 string CBG, using a bass string and a bass pickup for the top string so I can play really thundering bass.
The drawing is an idea for a solid-body 4 string. The unusual shape is designed for playing while sitting down. Thus the big re-curve on the bottom fits over my right thigh and allows the neck to be held higher than a normal electric would.
So many ideas, so little time...
James
Michael Glenn said:
Wow, for a first build I have to say that looks pretty darn amazing! (Actually it would look just as amazing if it was your 100th, 1,000th, whatever - it just flat out looks amazing.)
I really like the bridge and the hardware you put on the box. I've used grommets in my soundholes, partly for decoration but also to cover up "ugly" uneven holes, but I haven't considered adding any other hardware anywhere. Seeing your pictures makes me want to start adding more though.
Fantastic, sweet looking build! Very one-of-a-kind.
Sounds like you're hooked. :)
I haven't tried a 4-string yet, but I've done about 6 or 7 3-string CBGs. I still need to put pics up on my profile though; I keep forgetting about that. I just finished one with a HUGE box and strung it GDG, and I'm really happy with the sound.
I'm looking forward to seeing more of your work down the road,
Michael
Started by Habanera Hal. Last reply by Rich Butters Nov 6, 2019. 24 Replies 2 Likes
Started by Jeff Box. Last reply by Thomas Case Sep 4, 2019. 3 Replies 3 Likes
Started by Jeff Box. Last reply by Jeff Box Sep 9, 2017. 5 Replies 0 Likes
Started by Fomhorach. Last reply by Mike Jun 17, 2017. 4 Replies 0 Likes
Started by John Hopper. Last reply by Moritz Voegeli Feb 23, 2017. 1 Reply 0 Likes
Started by Fomhorach. Last reply by Fomhorach Jun 16, 2016. 7 Replies 0 Likes
Started by Darren Addy. Last reply by Ron "Oily" Sprague Jun 14, 2016. 7 Replies 1 Like
Started by Habanera Hal. Last reply by Fomhorach May 4, 2016. 12 Replies 2 Likes
Started by Mario Poggio. Last reply by Philip Hale May 4, 2016. 9 Replies 1 Like
Started by Chuck Dubman. Last reply by G.S. Monroe Dec 21, 2015. 17 Replies 0 Likes
Started by Brian Lemin. Last reply by Monterey Mar 20, 2015. 8 Replies 0 Likes
Started by Scott W. Last reply by Scott W Jul 17, 2014. 9 Replies 2 Likes
Started by Lee Martin. Last reply by Wichita Sam Apr 3, 2014. 4 Replies 0 Likes
Started by Tim Mac. Last reply by Better Trees Jan 15, 2014. 3 Replies 0 Likes
Started by Keith Weser. Last reply by Mario Poggio Nov 29, 2013. 9 Replies 0 Likes
Started by Jillian Holladay. Last reply by Jillian Holladay Jul 23, 2013. 12 Replies 2 Likes
Started by Wayne Bigler. Last reply by Wayne Bigler Jul 12, 2013. 5 Replies 0 Likes
Started by Roadkill a.k.a. John Maw. Last reply by Mark Bliss Jul 10, 2013. 163 Replies 1 Like
Started by MichaelS Country Boy Guitars. Last reply by StarrCBGs(Donovan) Jul 10, 2013. 19 Replies 0 Likes
Started by Sam Fontenot. Last reply by StarrCBGs(Donovan) Jul 10, 2013. 17 Replies 0 Likes
Posted by Vlad on March 31, 2024 at 11:48pm 0 Comments 1 Like
Posted by Vlad on March 6, 2024 at 2:32am 5 Comments 2 Likes
Posted by billy jones bluez on February 28, 2024 at 2:09pm 0 Comments 0 Likes
Posted by billy jones bluez on February 17, 2024 at 11:00pm 0 Comments 0 Likes
Posted by Vlad on February 11, 2024 at 1:06am 1 Comment 1 Like
May 11, 2024 from 11am to 8pm – Speakeasy Grill
0 Comments 0 LikesMay 30, 2024 from 6:30pm to 10pm – The Casual Pint of Huntsville
0 Comments 0 Likes© 2024 Created by Ben "C. B. Gitty" Baker. Powered by
Cigar Box Nation is presented by C. B. Gitty Crafter Supply, your one-stop-shop for Cigar Box Guitar parts and accessories!