I just built my first CBG and am quite amazed by the sound that comes out of the simple design I used. It is a neck through the box, fretless design. I cut 4 1/2" f-holes near the top (neck end) of the box. I've been making modifications trying to increase the resonance.

First thing I did was to move the bridge from the junction of the box and the tailpiece to the body of the box. The second thing I tried was to remove 1/8" of the neck inside the box so the box top had room to vibrate.

These two things made a huge difference!

Another thing I tried was to turn the box upside down so the f-holes were closer to the tail than the neck. That also put the bridge between those holes. That seemed to help some but not enough to keep it that way, mostly for cosmetic appearances.

Does anyone have any opinions on how the size, shape, and location of the sound holes will affect the resonance? I'm looking for ways to improve the acoustic qualities.

Also, I have a nice sized cigar box. It is made of the typical Spanish cedar but the face of the box has a paper cover. Does anyone know how the paper will affect the resonance? Does anyone have any tips for removing that paper?

Thanks for any insight that anyone can give me!

Views: 1572

Replies to This Discussion

Well I put the dowel from the neck to the lid but I had to add some support to the neck and that is touching the back of the box so in essence, it is solid from the the back of the box to the lid.

I'm wondering if I'm off track with the dowel thing. It might make more sense if the dowel went from the front to the back in body with an attached neck instead of a neck through body.

Another thing to experiment with.

This is like the differences between Hollow Body guitars and Semi-Hollow Body guitars.

Hollow bodies don't have a block under the bridge and allows the top to vibrate freely which lessens the instruments sustain because the tops vibration interrupts the string vibrations duration, but has a louder acoustic volume.

Semi-Hollow body has a block under the bridge from top to back which lessens/dampens the top's vibration which increases sustain, but also lessens/dampens acoustic sound waves resulting in loss of  acoustic volume. Which is why most Semi-hollow instruments have pickups of some kind.

Soundholes: There is a mathematical calculation for this on acoustic guitars. If you do a Goggle search you'll find the right answer. I lost that link.

Soundhole & Bridge location is usually best near the center of the sound board which also happens to be the best place for the bridge. Think about this in relation to a acoustic guitar.

I think that the typical location for sound holes and bridge on CBG's is part of the CBG instrument's sound and charm. When I was building my CBG, I looked over several CBG instruments and went with what I was seeing. 2 - 3/4" soundholes near the neck on each side of the strings and bridge close to the edge of the box. If you follow the Acoustic Guitar build & sound principles it will work better acoustically, but going too far in that direction will move you away from CBG territory. Have to watch out for that fine line.

Sorry for the long post, hope it helps.

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Discussion Forum

Cutting deep boxes in half

Started by Justin Stanchfield. Last reply by Taffy Evans Mar 20. 9 Replies

Attention 1st time builders!

Started by BrianQ.. Last reply by MadGomer Feb 27. 2 Replies

Brickhouse CBG Wiring

Started by Ian Boyd. Last reply by Ian Boyd Dec 11, 2023. 1 Reply

Fretless fret markers

Started by Michael Myers. Last reply by Michael Myers Apr 20, 2023. 8 Replies

canjo building and tuning

Started by Brenda. Last reply by MadGomer Dec 3, 2022. 5 Replies

Minimum tools needed

Started by Wichita Sam. Last reply by Taffy Evans Nov 14, 2022. 21 Replies

High G problem

Started by Michael Myers. Last reply by Taffy Evans Nov 3, 2022. 4 Replies

Doubling the high string

Started by Robert Killen. Last reply by Paul Craig Oct 14, 2022. 23 Replies

Aluminum License Plate

Started by Larry Sobol. Last reply by Larry Sobol Oct 1, 2022. 6 Replies

C. B. Gifty three string fretless kits.

Started by jon neet. Last reply by Taffy Evans Aug 16, 2022. 6 Replies

Frettin' and stainin'

Started by Doug Laffin. Last reply by Order99 Aug 11, 2022. 4 Replies

Bolt on neck to a set neck body?

Started by Paul Craig. Last reply by Paul Craig Jul 17, 2022. 14 Replies

Locations

Started by Roy Smith. Last reply by the anonymous pick May 15, 2022. 2 Replies

Help please re Bento Box Uke "nut"

Started by Al Lobe. Last reply by BrianQ. May 10, 2022. 18 Replies

Clarification on pick ups

Started by Michael Myers. Last reply by Taffy Evans May 6, 2022. 5 Replies

Licence plate cbg

Started by Michael Myers. Last reply by Michael Myers May 2, 2022. 5 Replies

Builder's Tips

Started by Wichita Sam. Last reply by MadGomer Feb 23, 2022. 2 Replies

Getting there but needing advice/help please.

Started by Lionhound. Last reply by MadGomer Feb 18, 2022. 8 Replies

Tres Cubano Build

Started by Paul Craig. Last reply by Paul Craig Dec 9, 2021. 18 Replies

CB Gitty Country Roads Banjo kit

Started by Ken Hope. Last reply by Christopher G Daniels Nov 29, 2021. 4 Replies

Latest Activity

BrianQ. liked Gary O'slide's video
31 minutes ago
BrianQ. liked Poorness Studios's video
37 minutes ago
Poorness Studios liked Dogleg Steve's video
2 hours ago
Poorness Studios liked Dogleg Steve's video
2 hours ago
Gary O'slide posted videos
2 hours ago
A.D.EKER commented on Poorness Studios's video
Thumbnail

David Bowie's Space Oddity (covered on guitar & Stylophone)

"Nice ly done Kale olthow whit verry minimal typecal Space odity effects, i know it was your Bowie…"
2 hours ago
Dogleg Steve posted a status
"Hey - I came runner up top 10 of the 2023 4th annual international CBG video playoffs!"
3 hours ago
Dogleg Steve posted videos
3 hours ago
Doug Thorsvik commented on Poorness Studios's video
Thumbnail

David Bowie's Space Oddity (covered on guitar & Stylophone)

"Wow! Well done Kale. Nailed it!!! You really captured the essence of the song and it’s…"
4 hours ago
Dogleg Steve posted a status
4 hours ago
Poorness Studios posted a video

David Bowie's Space Oddity (covered on guitar & Stylophone)

I've been meaning to do a cover of this since I got my David Bowie Stylophone last Christmas. This song is outside my vocal range and difficult to sing, but ...
5 hours ago
A.D.EKER commented on A.D.EKER's video
Thumbnail

There i was Standing at the ..... BCB - A. D. Eker 2024

"Thank you Keith for standing at the crossroads whit me for a while ! appriciated !"
6 hours ago

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->